[aprssig] HT-220 HT's for APRS
Brian B. Riley
brianbr at mac.com
Fri Jul 20 00:23:11 EDT 2007
I was careful how I worded it but there's always someone ready to
jump on it ... when it failed, the entire remainder of the relay arm
literally fell off, but when I looked the pieces over and held them
up to where they had been attached it was amazing that the arms had
many any contact at all as the ends were worn down a lot as well. So,
my statement stands, it was amazing that it worked at all during the
week before it failed! Now, Wes, go sit in the corner for an hour!
cheers ... BBR
On Jul 20, 2007, at 12:09 AM, Wes Johnston, AI4PX wrote:
> Huh???? lol... it was working before it failed.... hmmm.... Should
> we say it stopped working after it broke?
> Wes
>
>
> On 7/19/07, Brian B. Riley <brianbr at mac.com> wrote:
> I had a Midland 13-509 (220 MHz) that was the backbone link on a very
> busy packet node literally wear the arms off the relay the amazing
> thing was that was even working for the last week before it finally
> failed.
>
>
> ---
> cheers ... 73 de brian riley, n1bq , underhill center, vermont
> <http://web.mac.com/brianbr/ > Tech Blog
> <http://www.wulfden.org/TheShoppe.shtml>
> Home of the
> K107 Serial LCD Controller Kit FT817 Power Conditioner Kit
> Tab Robot Laser Tag Kit MSP430 Chips and Connectors
> Propeller Robot Controller SX48 "Tech Board" Kit
>
>
>
> On Jul 19, 2007, at 10:35 PM, Doug Younker wrote:
>
> >
> >
> > Stephen H. Smith wrote:
> >
> >>>
> >> Why would it matter if the unit uses mechanical relays or
> >> electronic switching for PTT?
> >
> >
> > As long as the switching time is manageable, I don't think it makes
> > a difference. Azdens must have been a good buy when the old boys
> > who pioneered packet radio in this part of Kansas built their
> > network, because several where put into packet service 19-20 or so
> > years ago. They use T/R relays and at least one in now in APRS
> > service, relay still clicking it's little ole' heart out. At a more
> > relaxed pace now, since it no longer passes PBBS traffic. :)
> > Doug, N0LKK
> >
> > _______________________________________________
> > aprssig mailing list
> > aprssig at lists.tapr.org
> > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>
> --
> In theory there is no difference between practice and theory.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20070720/43611ff3/attachment.html>
More information about the aprssig
mailing list