[aprssig] Re: Viewpoint+, Web based APRS program with 2-way APRS messaging.

[BH]

Are few more iterations and suggestions, Viewpoint+ v0.7.27 has been
posted.  The GMAP link is now user definable, so you can use Google Maps,
FindU, or your own combination which you specify.  A minor tweak was done to
the repeat message algorithm.  Several other minor fixes.
ftp://www.tapr.org/aprssig/winstuff/aprsplus/Viewpoint+Setup0727.exe

KH2Z

On 7/2/07, BH <brent.hildebrand at gmail.com> wrote:
>
> From feedback I have received, I have found a bug in formatting of the
> Posit packet where the leading zero was being dropped.  v0.7.24 has been
> posted to correct this.
>
> In Viewpoint+, for outgoing message, if you want to kill an out going
> message, from the message entry screen, enter the following for the text:
> //XX   where XX is the outgoing message you want to kill.  Example,  //73
> for outgoing message 73.  Viewpoint+ indicates outgoing messages with a
> number off the left of the messages.  Green means the message is active.
> Black means the message has been ACK'ed.  Blue, the message has gone cold.
>
> Brent KH2Z
>
>
> On 7/1/07, BH <brent.hildebrand at gmail.com> wrote:
> >
> > Note - Viewpoint+ will use two IP address for serving HTTP pages.
> > Localhost, 127.0.0.1, and the IP address assigned to the computer by
> > your local network.  So to view pages, point your  browser to
> > http://localhost[:port] where port is the port number you assigned in
> > the [CONFIG] section of Settings.  If this is port 80, then leave off the
> > port designation.
> >
> > Brent KH2Z
> >
> > On 7/1/07, BH <brent.hildebrand at gmail.com > wrote:
> > >
> > > I've posted a new program I'm experimenting with which I call
> > > Viewpoint+.  The program current connects to the APRS/IS and parses the data
> > > stream.  Users can connect to Viewpoint+ using a web browser.  If you put
> > > Viewpoint+ on the Internet, that means you can have access to the program
> > > from just about anywhere.  Viewpoint+ allows for the sending and receiving
> > > of APRS messages.  Users connecting to Viewpoint+ are asked for their
> > > Callsign and an operator supplied login passcode.  Thus you have control of
> > > who uses your system.
> > >
> > > Brief documentation about the program can be downloaded here:
> > > ftp://ftp.tapr.org/aprssig/winstuff/aprsplus/Viewpoint+.pdf
> > >
> > > The program itself can be downloaded here:
> > > ftp://ftp.tapr.org/aprssig/winstuff/aprsplus/Viewpoint+Setup0723.exe
> > >
> > > The program does require an installation registration number which I
> > > will supply when you ask for it by email.  This number is used to validate
> > > the program to the APRS/IS.
> > >
> > > Note: Viewpoint+ currently does not parse weather data, and does not
> > > decode Citizen's weather stations.
> > >
> > > Note2: Viewpoint+ is experimental.  It may be withdrawn at any time.
> > > Features may change or removed, and not be compatible with older versions.
> > >
> > > Comments are welcome.  Please put Viewpoint in the subject of any
> > > email correspondence.  Also include what version number you are using.
> > >
> > > Brent Hildebrand, KH2Z
> > >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20070704/cab21830/attachment.html>