[aprssig] UIview Digiepater add-on

Robert Bruninga bruninga at usna.edu
Fri Jan 26 14:25:51 EST 2007


> Are you talking about an add-on for "digipeaters", or 
> voice repeater object add-on??? I thought you guys 
> were trying to figure the best way to advertise 
> Voice Repeaters, the Icons are already advertising the 
> digipeaters, :-)

Yes, it has been confusing with all the ideas flyng about.  But
this one is for Europe where a lot of the digipeaters are not
KPC-3+ TNC's which can easily add the voice repeater object at
the digi.  In Europe a lot of the digis are well situated home
stations that are running Uiview as the local digipeater.

And as it stands, you cannot TX a local -direct-no-hop- object
from Uiview unless you change your entire station to no hops for
anything.  So Jan suggested an add-on for Uiview that will send
these local voice repeater object packets DIRECT only,
independent of the station setting.  But again, this only aplies
where a local wide area digi is running Uiview.  This is rare in
the USA.  But more prevelent in Europe.

If this feature is improperly used, of course, we will end up
with a spam nightmare.  I hope the ad-on will only allow DIRECT
packets only.  Since if it is a DIGI, it is HIGH and DIRECT is
what is intended to cover the area of the voice reepeater.  If
it is low, and needs to digipeat to cover the same area as the
voice repeater, then it probably shouldn't be a "digi" and
should not be sending ot these objects...

Bob, Wb4APR

> Robbie
> 
> Robert Bruninga wrote:
> 
> >>>Any one know how to code & willing to write this add-on?
> >>>      
> >>>
> >>I'll send a copy of that part of the communication to the
> >>    
> >>
> >UI-View
> >  
> >
> >>group.
> >>    
> >>
> >
> >We ought to make sure to emphasize that this addon should
only
> >be for designated "digipeaters" (usually at high sites) and
that
> >these objects must be direct, or we are putting an explosive
QRM
> >generating tool in the hands of the masses who might not
fully
> >understand the significance and impact of improper use.
> >
> >Thanks
> >Bob, WB4APR
> >
> >
> >
> >_______________________________________________
> >aprssig mailing list
> >aprssig at lists.tapr.org
> >https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> >
> >  
> >
> 
> 





More information about the aprssig mailing list