[aprssig] Fwd: RE SETTING YOUR TNC
julien mervyn dedier
julien9z4fz at gmail.com
Tue Jan 23 16:47:01 EST 2007
After this email you all will never make the same mistake twice hi hi,no
software weather it is UI-VIEW,APRS+SA,WINAPRS,AGWTRACKER,LINK 700,these
software cannot reset any tnc with packet virus ,the various software will
show you it do the reset, still in the tnc is packet virus.
Ok look at a tnc having packet virus ,no way these software in terminal
mode can fix the tnc, you put a tnc with packet virus on any one of the
software in terminal mode see if it can reset the tnc no they cannot do the
reset.
The only true and correct reset is via HYPER TERMINAL on any windows
95/98/2000/ME/XP
This is the only way to clean and remove packet virus from any tnc ,this is
base on experience and doing it time and time again.
While in hyper terminal you can do packet,chat mode,you can go into your
friend mail box drop him a mail,console mode packet chat hi all this you can
do while still doing aprs,we will need how for the tm-d700a to cooperate
with the th-d7 hand held radio ,it is called the mail box cooperation
between 700a and d7 hi hi very important issue base on d7 limitation in the
tnc.
A big question the tnc mail box while in aprs you have 15 SSID in the
tm-d700a mail box you need to give it a call as show in previous email all
mail box carry SSID-1, this can be discuss when we start to program the tnc
.
A next big problem hi fellows hams all of you who are running the radios in
TNC PKT mode fellows you are actually running the radio in tnc mode ,yes but
Julien I am running it with UI-view in kiss mode, yes my friend even in kiss
mode you tnc need to be set right so guy how do you fix it that is the
entire ham community problem we all have to play our part ,and get it
corrected .
Running the TNC PKT mode with any software in kiss mode you still have the
radio in tnc ,the tnc parameter need to be adjusted these radios are real
special radios very and nice ,so care must be maintain .
BELOW IS THE INFORMATION ON HOW TO RESET THE TNC THE PROPPER WAY ,FULL RESET
FROM THE CONSOLE IS NOT.
**
Setting up HyperTerminal to work with your TH-D7A, TH-D7AG.,TM-D700A
1 Select Hyper Terminal from the Start Menu in Windows
95/98/2000/ME/XP
2 Click on Start
3 Click on Programs
4 Click on Accessories
4 Click on Communications
5 Click on HyperTerminal in the NAME box filled it in, and now
scroll across to the ICON
( phone with the red, green, blue circles ) and click OK.
6 Next screen is Connect TO, click OK
7 Com port properties screen will appear filled in the information
below
Bits Per Second 9600
Data Bits 8
Parity None
Stop Bits 1
Flow Control None
8 Make the following selections in the appropriate box. Once you
have made all of the selections click OK on both screens.
9 " VERY IMPORTANT STEP "
A. Click on FILE at the top of the Hyperterminal screen
B Click on PROPERTIES
C. Click SETTINGS
D. Click ASCII SETTINGS
E. Check the Echo Typed Characters Locally box, now click OK, click
OK again on the next window
F. Now hit return and you should see now see in the hyperterminal
screen CMD:
Instruction to operate packet with HyperTerminal..
Click Start
Click Programs
Click Accessories
Click on Communications
Click on HyperTerminal, you may name your HyperTerminal folder
Enter mycall WD6DX (example)-return,
Adjust the Baud Rate to the same as the station your are sending packet
to by typing hb 9600-return (example). To connect to another station
type after cmd: c KJ6DX (example) and then return. The TM-D700A will
start sending packet burst, if it does not connect, it will show on the
HyperTerminal screen Disconnected Time Out.
Instruction to operate packet with HyperTerminal..
Click Start
Click Programs
Click Accessories
Click on Communications
Click on HyperTerminal, you may name your HyperTerminal folder
Enter mycall WD6DX (example)-return,
Adjust the Baud Rate to the same as the station your are sending packet
to by typing hb 9600-return (example). To connect to another station
type after cmd: c KJ6DX (example) and then return. The TH-D7A, or
TH-D7A(G) will start sending packet burst, if it does not connect, it
will show on the HyperTerminal screen Disconnected Time Out.
The built-in TNC in the TH-D7A, or TH-D7A(G)is a very simple. Its
primary function is used for the DX Packet Cluster, and Kenwood Sky
Command. Its function is very limited, and does not support full duplex,
and PSK. It only has the hardware flow, and not transparent mode. It
does not send binary files.
------------------------------------------------------------------------
------------------------------------
TH-D7A, AG / TM-D700A TNC reset.
A) Start Hyperterminal from Windows and set it for the correct port and
at same
speed as set for access in packet, while PC is connected to TH-D7A,
AG/ TM-D700A via
the PC connection on the side of the TH-D7A, AG./ TM-D700A
B) Turn on Packet Mode in the TH-D7A, AG / TM-D700A by pressing the TNC
Button for
about 1 second and then you see TNC PACKET
in the top left corner of the TH-D7A, AG display TNC parameters
should now be accessible.
C) Perform a TNC RESET command via the hyperterminal screen (i.e. type
RESET).
THIS IS NECESSARY BECAUSE THE TH-D7A, AG TM-D700A NEVER RESETs THE TNC,
NOT
EVEN DURING A FULL RADIO RESET.
------------------------------------------------------------------------
-----------------------------------
--
THANKS
JULIEN
9Z4FZ//TRINIDSA & TOBAGO.
M0JDD//UNITED KINGDOM.
M0JDD/J3//GRENADA.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20070123/83b46279/attachment.html>
More information about the aprssig
mailing list