<span class="gmail_quote"><br><br></span>
<div style="FONT-SIZE: 12pt; MARGIN: 0px 10px 10px; COLOR: #010158; FONT-FAMILY: Arial" vlink="#0000ff" link="#0000ff" background="/mail/?attid=0.1&disp=emb&view=att&th=11050ebdda0987ac" bgcolor="#f3eded" alink="#0000ff" text="#010158">
<table cellspacing="0" cellpadding="2" width="100%" border="0">
<tbody>
<tr>
<td style="PADDING-RIGHT: 0px; PADDING-LEFT: 0px; FONT-SIZE: 12pt; PADDING-BOTTOM: 0px; DIRECTION: ltr; PADDING-TOP: 0px" valign="top" width="100%">
<div>After this email you all will never make the same mistake twice hi hi,no software weather it is UI-VIEW,APRS+SA,WINAPRS,AGWTRACKER,LINK 700,these software cannot reset any tnc with packet virus ,the various software will show you it do the reset, still in the tnc is packet virus.
</div>
<div> </div>
<div>Ok look at a tnc having packet virus ,no way these software in terminal mode can fix the tnc, you put a tnc with packet virus on any one of the software in terminal mode see if it can reset the tnc no they cannot do the reset.
</div>
<div> </div>
<div>The only true and correct reset is via HYPER TERMINAL on any windows 95/98/2000/ME/XP</div>
<div>This is the only way to clean and remove packet virus from any tnc ,this is base on experience and doing it time and time again.</div>
<div> </div>
<div>While in hyper terminal you can do packet,chat mode,you can go into your friend mail box drop him a mail,console mode packet chat hi all this you can do while still doing aprs,we will need how for the tm-d700a to cooperate with the th-d7 hand held radio ,it is called the mail box cooperation between 700a and d7 hi hi very important issue base on d7 limitation in the tnc.
</div>
<div> </div>
<div> </div>
<div>A big question the tnc mail box while in aprs you have 15 SSID in the tm-d700a mail box you need to give it a call as show in previous email all mail box carry SSID-1, this can be discuss when we start to program the tnc .
</div>
<div> </div>
<div>A next big problem hi fellows hams all of you who are running the radios in TNC PKT mode fellows you are actually running the radio in tnc mode ,yes but Julien I am running it with UI-view in kiss mode, yes my friend even in kiss mode you tnc need to be set right so guy how do you fix it that is the entire ham community problem we all have to play our part ,and get it corrected .
</div>
<div> </div>
<div>Running the TNC PKT mode with any software in kiss mode you still have the radio in tnc ,the tnc parameter need to be adjusted these radios are real special radios very and nice ,so care must be maintain .</div>
<div> </div>
<div> </div>
<div>BELOW IS THE INFORMATION ON HOW TO RESET THE TNC THE PROPPER WAY ,FULL RESET FROM THE CONSOLE IS NOT.</div>
<div> </div>
<div dir="ltr"><i></i> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div>Setting up HyperTerminal to work with your TH-D7A, TH-D7AG.,TM-D700A</div>
<div> </div>
<div>1 Select Hyper Terminal from the Start Menu in Windows</div>
<div>95/98/2000/ME/XP</div>
<div>2 Click on Start</div>
<div>3 Click on Programs</div>
<div>4 Click on Accessories</div>
<div>4 Click on Communications</div>
<div>5 Click on HyperTerminal in the NAME box filled it in, and now</div>
<div>scroll across to the ICON</div>
<div> ( phone with the red, green, blue circles ) and click OK.</div>
<div>6 Next screen is Connect TO, click OK</div>
<div>7 Com port properties screen will appear filled in the information</div>
<div>below</div>
<div> </div>
<div> </div>
<div> Bits Per Second 9600</div>
<div> Data Bits 8</div>
<div> Parity None</div>
<div> Stop Bits 1</div>
<div> Flow Control None</div>
<div> </div>
<div>8 Make the following selections in the appropriate box. Once you</div>
<div>have made all of the selections click OK on both screens.</div>
<div> </div>
<div>9 " VERY IMPORTANT STEP "</div>
<div> A. Click on FILE at the top of the Hyperterminal screen</div>
<div> B Click on PROPERTIES</div>
<div> C. Click SETTINGS</div>
<div> D. Click ASCII SETTINGS</div>
<div> E. Check the Echo Typed Characters Locally box, now click OK, click</div>
<div>OK again on the next window</div>
<div> F. Now hit return and you should see now see in the hyperterminal</div>
<div>screen CMD:</div>
<div> </div>
<div> </div>
<div> </div>
<div>Instruction to operate packet with HyperTerminal..</div>
<div> </div>
<div>Click Start</div>
<div>Click Programs</div>
<div>Click Accessories</div>
<div>Click on Communications</div>
<div>Click on HyperTerminal, you may name your HyperTerminal folder</div>
<div>Enter mycall WD6DX (example)-return,</div>
<div>Adjust the Baud Rate to the same as the station your are sending packet</div>
<div>to by typing hb 9600-return (example). To connect to another station</div>
<div>type after cmd: c KJ6DX (example) and then return. The TM-D700A will</div>
<div>start sending packet burst, if it does not connect, it will show on the</div>
<div>HyperTerminal screen Disconnected Time Out.</div>
<div>Instruction to operate packet with HyperTerminal..</div>
<div> </div>
<div>Click Start</div>
<div>Click Programs</div>
<div>Click Accessories</div>
<div>Click on Communications</div>
<div>Click on HyperTerminal, you may name your HyperTerminal folder</div>
<div>Enter mycall WD6DX (example)-return,</div>
<div>Adjust the Baud Rate to the same as the station your are sending packet</div>
<div>to by typing hb 9600-return (example). To connect to another station</div>
<div>type after cmd: c KJ6DX (example) and then return. The TH-D7A, or</div>
<div>TH-D7A(G) will start sending packet burst, if it does not connect, it</div>
<div>will show on the HyperTerminal screen Disconnected Time Out.</div>
<div> </div>
<div> </div>
<div>The built-in TNC in the TH-D7A, or TH-D7A(G)is a very simple. Its</div>
<div>primary function is used for the DX Packet Cluster, and Kenwood Sky</div>
<div>Command. Its function is very limited, and does not support full duplex,</div>
<div>and PSK. It only has the hardware flow, and not transparent mode. It</div>
<div>does not send binary files.</div>
<div> </div>
<div>------------------------------------------------------------------------</div>
<div>------------------------------------</div>
<div> </div>
<div> </div>
<div> </div>
<div>TH-D7A, AG / TM-D700A TNC reset.</div>
<div> </div>
<div>A) Start Hyperterminal from Windows and set it for the correct port and</div>
<div>at same</div>
<div> speed as set for access in packet, while PC is connected to TH-D7A,</div>
<div>AG/ TM-D700A via</div>
<div> the PC connection on the side of the TH-D7A, AG./ TM-D700A</div>
<div> </div>
<div>B) Turn on Packet Mode in the TH-D7A, AG / TM-D700A by pressing the TNC Button for</div>
<div>about 1 second and then you see TNC PACKET</div>
<div> in the top left corner of the TH-D7A, AG display TNC parameters</div>
<div>should now be accessible.</div>
<div> </div>
<div>C) Perform a TNC RESET command via the hyperterminal screen (i.e. type</div>
<div>RESET).</div>
<div> THIS IS NECESSARY BECAUSE THE TH-D7A, AG TM-D700A NEVER RESETs THE TNC, NOT</div>
<div> EVEN DURING A FULL RADIO RESET.</div>
<div> </div>
<div> </div>
<div>------------------------------------------------------------------------</div>
<div>-----------------------------------</div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div></td></tr>
<tr>
<td width="100%">
<table cellspacing="0" cellpadding="0" width="100%">
<tbody>
<tr>
<td width="100%"></td>
<td valign="bottom" align="middle"></td>
<td valign="bottom" align="middle"></td></tr></tbody></table></td></tr></tbody></table></div><br clear="all"><br>-- <br>THANKS<br><br>JULIEN<br>9Z4FZ//TRINIDSA & TOBAGO.<br>M0JDD//UNITED KINGDOM.<br>M0JDD/J3//GRENADA.