[aprssig] Bar Code Formats for APRS

[Wes Johnston, AI4PX]

What would be slick would be if you could program a bar code reader with a
prefix and/or suffix..... I'm sure could be done with an additional pic
chip.  so you scan a bar code that represents a callsign and the reader
appends the position and sends.  would be good for applications like
scanning runners past a checkpoint.

Wes


On 2/27/07, Robert Bruninga <bruninga at usna.edu> wrote:
>
> I think a BarCode Application is ideal for APRS.
>
> > IF the entrant's scorecards could be barcoded, they
> > could be scanned on the way IN to a stage and on the
> > way OUT of a stage.
>
> I hope we can integrate the Barcodes into APRS in a seamless way
> so that they can be tabulated even on existing machines.  Here
> are some options:
>
> >STATUS Packet...
> :BLN1SCAN :A bulletin to all
> :DATABASEx:A message to "databaseX callsign"
> =POSIT/position comment text
>
> MESSAGE FORMAT:  A message to s specific applications callsign
> wouild be great for generic applications.  They will be captured
> by all APRS clients and can be captured in FINDU etc.
>
>
> POSIT FORMAT:  The POSIT format is good for an application where
> the person with the wand is moving about.  Such as moving
> through a building or something (or a cave) and whenever they
> see a barcode on the wall, they scan it and their wand sends the
> LAT/LONG position AND any other data that is on the bar code.
>
> Can anyone see any application that cannot be fit into either of
> these formats?
>
> Bob, WB4APR
>
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>


-- 
In theory there is no difference between practice and theory.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20070227/322498fe/attachment.html>