[aprssig] ALogger 3.0.0 released, KISS and remote client support

[Bill Diaz]

ALogger 3.0.0 has been released.  This version includes support for KISS
TNC's and the ability for remote clients to access an attached TNC or
D7/D700 as well as logged packets from the APRS-IS.

The remote client capability was designed primarily to permit remote control
of a PCSAT or similar Earth Station over the Internet and to monitor all
radio/TNC traffic. 

Remote clients can connect to the ALogger session using a TelNet like
connection (HyperTerminal etc) to receive all logged packets and
communications to and from an attached serial device.  Write access to the
attached serial device and APRS-IS is password protected, while other users
will have read only access.

When used with a Virtual Serial Port (see
http://www.hw-group.com/products/hw_vsp/index_en.html ) applications can
obtain ALogger output, including Serial communications, via existing
application serial port interfaces.  For example, it will now be possible
for APRS-DOS to connect to an ALogger session via it's serial port and to
access the Internet for communications via the APRS-IS.  

ALogger continues to provide the ability to log selected packets to disk for
later review, and to gate selected packets received over the serial port to
the APRS-IS.

ALogger 3.0.0 can be downloaded from http://www.billdiaz.dynip.com

Bill KC9XG