KC0RNP-1 Digi - WAS Re: [aprssig] Need Help...

[Ryan Butler]

The 760G does have an accessory "port" but it requries a KCT-19 cable
(available from kenwood dealers) to bring the port outside the back of
the radio to a molex plug.

It is by far a better way of interfacing than the mic jack as it will
bypass all of the mic amp etc.

Ryan, KB0JQO

On Fri, 2007-12-14 at 09:24 -0600, Richard N. Piper IV wrote:
> The TK-760G uses the same mic cable as a D700. In fact I was able to
> take a old eathernet cable I had and pug it into both ends of a mic I
> have for the TK-760G and use that mic with my D700.
> 
> The TK-760G does not have a "data" port or serual port like the
> Kenwood D700 has so I think that 2 get it to TX you would have to take
> the TX cable from the TNC-X and hook it into where the mic would
> normaly go on the TK-760G.
> 
> Richard N. Piper IV
> KC0RNP
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig