[aprssig] KPC-3 Plus - no tones

[Chuck Gooden]

As long as your going to do a hard reset don't forget to check the battery.

Richard Amirault wrote:
> ----- Original Message ----- From: "Bogdan, Rick"
>> I'm running it in KISS mode using Ui-View .  I gave it a RESTORE D
> command from HyperTerminal, came back said PRESS (*) TO SET BAUD RATE, I
> did and it asked for my call, I entered it and the unit stopped
> responding.  Hit the RETURN key and the curser skips down a few lines
> and there is no other response.  Did RESTORE D again with the same
> response.  Now it doesn't receive either.
> I've had this TNC since '00 and the last five years running it as a
> IGATE with out any problems till now.
>
> Sounds like it's time to do a *hardware* reset. Look in your manual.
>
> Richard Amirault
> Boston, MA, USA
> http://n1jdu.org
> http://fandom.n1jdu.org
> http://www.youtube.com/watch?v=J7hf9u2ZdlQ
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>