[aprssig] RE: VH-SJS Aeronautical mobile

[Bruce & Leigh Coates]

Hi Andrew

I built an antenna mount to clamp to the wing strut of a Cessna 172.  You can see it at http://sarl.ca/ve5aa/CASARA/Casara.htm.  It's partially blocked by the airplane body and doesn't have much of a ground plane but it was still received by our digi over 100 km away.

73, Bruce
  ----- Original Message ----- 
  From: Andrew Rich 
  To: vk4tec at tech-software.net ; TAPR List 
  Cc: ozaprs 
  Sent: Friday, November 10, 2006 3:14 AM
  Subject: [aprssig] RE: VH-SJS Aeronautical mobile


  Need some suggestion for aerial mount.

  Aerial will come down for a bit and then bend back - parrallel to belly.



  -----------------------------------------
  Andrew Rich
  Amateur radio callsign VK4TEC
  email: vk4tec at tech-software.net
  web: http://www.tech-software.net
  Brisbane AUSTRALIA 

    -----Original Message-----
    From: Andrew Rich [mailto:vk4tec at tech-software.net]
    Sent: Friday, 10 November 2006 7:04 AM
    To: TAPR List
    Cc: ozaprs
    Subject: VH-SJS Aeronautical mobile


    Gudday

    We are in the process of fitting out a plane with APRS.

    It will have a 

    GARMIN GPS 196
    MAXON Data radio (5W)
    TinyTrak3 
    RG58
    N-TYPE panel mount
    Home brew 1/4 wave bent over whip.

    Callsign will most likely be VK4HDA-9
    -----------------------------------------
    Andrew Rich
    Amateur radio callsign VK4TEC
    email: vk4tec at tech-software.net
    web: http://www.tech-software.net
    Brisbane AUSTRALIA 




------------------------------------------------------------------------------


  _______________________________________________
  aprssig mailing list
  aprssig at lists.tapr.org
  https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20061110/9eb7e809/attachment.html>