Fw: [aprssig] Re: I'm gonna drill....Right tool for the job..

[Brian Webster]

I stand corrected.



Thank You,
Brian N2KGC

-----Original Message-----
From: tvsjr at sprynet.com [mailto:tvsjr at sprynet.com]
Sent: Friday, May 05, 2006 7:06 PM
To: TAPR APRS Mailing List; bwebster at wirelessmapping.com; TAPR APRS
Mailing List
Subject: Re: Fw: [aprssig] Re: I'm gonna drill....Right tool for the
job..


> If you are using the 3/8" mount that is not considered an NMO mount. That
is
> considered a Larsen or PL-259 type connection. The NMO is a specific
> reference to the original Motorola design with the 3/4" hole.

Wrong.

http://www.tessco.com/products/displayProducts.do?groupId=365&subgroupId=10

Page through and learn. There are also a few that use a 5/8" hole, snap-in
types using the 3/8" hole, pivoting mounts, all sorts of widgets... all NMO
mounts.