[aprssig] Setting up A WIDE1-1 FILL-IN Digipeater

[Robert Bruninga]

Sounds like you have UIFLOOD or UITRACE enabled.
THey have to be disabled to work as a WIDE1-1 only
digi.  You put WIDE1-1 in the UIDIGI list.  Bob

>>> mckeehan at mckeehan.homeip.net 05/02/06 3:07 PM >>>
I'm playing with setting up my D700 as a fill-in digi.

I followed the settings found here:
     http://eng.usna.navy.mil/~bruninga/aprs/WIDE1-1settings.txt 

But what I find is that my D700 will digi a packet packet with WIDE1-1 in the
path as WIDE1-1*, not MYCALL*

Have I missed something in my setup? or is this not possible?

-- 
William McKeehan
KI4HDU
Internet: mckeehan at mckeehan.homeip.net 
http://mckeehan.homeip.net 

Leave the beaten track occasionally and dive into the woods.
Every time you do so you will be certain to find something that you have never
seen before.
     - Alexander Graham Bell

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org 
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig