[aprssig] Need help with opentracker (oops - pocket tracker)

[Andrew Rich]

-----------------------------------------
Andrew Rich
Amateur radio callsign VK4TEC
email: vk4tec at tech-software.net
web: http://www.tech-software.net
Brisbane AUSTRALIA

  -----Original Message-----
  From: Andrew Rich [mailto:vk4tec at tech-software.net]
  Sent: Friday, 31 March 2006 7:25 PM
  To: TAPR List
  Subject: [aprssig] Need help with opentracker


  Gudday

  Need some help. A friend left me a pocket tracker when he passed on.

  It works, And is on 145.175 MHz and I am therefore assuming it is the
frequency agile version and he has programmed it up.

  It has his call sign in it and it sends packet fine.

  I am trying to re-configure the tinytrak part of the pockettracker.

  I see on my CRO, data going to pin 2 on the PIC socket when I run TinyTrak
config for version 3.

  Any suggestions ? Do I have a dud PIC ?

  Jumper settings are -

  ON (for the ON / OFF jumper)
  FS - "9"
  Test is out (ie no PTT)
  LED's is "IN"

  http://www.byonics.com/pockettracker/ptfa.php

  When I power it up it flashes "GREEN GREEN" "RED"

  I have done a serial loopback on the socket for the PIC - works

  I have swapped my wires on the serial just in case I made a mistake.

  Any help me with a "how to" on this pockettracker please ?

  The PIC is 16F628A and the board says "HiValue Radio" 2004




  -----------------------------------------
  Andrew Rich
  Amateur radio callsign VK4TEC
  email: vk4tec at tech-software.net
  web: http://www.tech-software.net
  Brisbane AUSTRALIA

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20060331/f7db5958/attachment.html>