[aprssig] aprs-scs version 1.29 is ready for downloading

[Amateur Radio WB8NUT]

Thought I would give it a try so I downloaded it.  How do I get it to 
work with AGWPE?  How does it connect to MultiPSK?

Thanks,

Duffy
www.wb8nut.com

kb2scs at optonline.net wrote:
> Hi All
>          A new version of aprs-scs is now ready for your down loading 
> pleasure.
> Please go to http://www,tapr.org/~kb2scs
>
> What follows is the Whats New.
>
> Version 1.29 
> Added a new HF mode. 
> aprs-scs can now work with Multipsk. aprs-scs is able to connect to 
> the new multipsk server. aprs-scs will work with all of the multipsk 
> modes except any mode that 
> does not transmit the following characters. 
>   
> / 
> - 
> \ 
> Note not all modes that Multipsk can output and receive send the 
> above characters. 
> Since the above characters are in every aprs packet then if the above 
> characters are not compatitable then aprs-scs will be unable to 
> decode the packets
>
> Let us hope we never witness the "Silence Of The Hams"
> 73 DE John  KB2SCS
>        E-Mail:            kb2scs at arrl.net
>        APRS-SCS     http://www.tapr.org/~kb2scs
>        Web Page:     http://www.qsl.net/kb2scs
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>   


-- 
"One ought never to turn one's back on a threatened danger and try to run away from it. If you do that, you will double the danger. But if you meet it promptly and without flinching, you will reduce the danger by half. Never run away from anything. Never!" -- Winston Churchill