[aprssig] TNC Sleeping

[Stan - N0YXV]

On my KPC3 I can use three CTRL-C's sent in under a couple of seconds. [That
works unless you set it to something else in the setup.]

-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Andre PE1RDW
Sent: Sunday, January 01, 2006 5:33 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] TNC Sleeping


Fred Atkinson, WB4AEJ schreef:

>    Well, I removed the lithium battery and the power cord.  Then I left it
>powered down for well over thirty seconds.  When I put everything back and
>powered it up, everything came back to normal.
>
>    What is a 'three byte incantation'?
>
>    73,
>
>
>
>Fred, WB4AEJ
>
>
>
A tnc running in KISS mode under tapr like firmware will stay in KISS
mode even when turned off and on, the hardware way of getting out of it
you have already discovered, the software way is to send the kiss return
command, this is the three byte incantation, from memory this is 0xC0
0xFF 0xC0.

73 de Andre PE1RDW

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig