[aprssig] AEA PK12 and UIView

Jan T. Pharo la2bba at jpharo.net
Thu Dec 28 09:23:40 EST 2006


Roger Grady <k9opo-1 at sbcglobal.net>, Thu, 28 Dec 2006 09:11:43 -0500:

>At 01:12 AM 12/28/2006, Daron J. Wilson wrote:
>
>>I picked up a PK-12 TNC and it seemed fine on packet, so I hoped to use it 
>>for my UIView APRS Igate.  I ve tried a couple of the UIView config files, 
>>looks like there are a couple commands not recognized that I have to 
>>adjust, but the biggest problem is what I get out of the TNC.  Here is a 
>>screen capture from a straight terminal program.  It appears to display 
>>the correct path information when I hear the station directly, but when it 
>>is digipeated, I get a string of digipeater callsigns in there.
>>
>>NEWPRT*>WIDE2-2>APN390 <UI>:
>>@232402z4445.37NS12402.98W_000/000g000t040r000p000P000b10292.WxDG
>>
>>PATSY>NEWPRT>NEWPRT*>APN382 <UI>:
>>$ULTW0000000001760245283E001897FF000103A70169015E00000000
>
>This is standard TNC-2 compatible behavior,  and also for the PK-12. It's 
>controlled by the MRpt command, which defaults to ON. Setting it to OFF 
>will display only the originating and destination stations.
>
Also, if PK12 will accept the Host mode KISS command from UI-View, you
don't need to care what the TNC can do; UI-View will control it.

-- 
73 de Jan, LA2BBA
Hvaler, Norway




More information about the aprssig mailing list