[aprssig] AEA PK12 and UIView

[Roger Grady]

At 01:12 AM 12/28/2006, Daron J. Wilson wrote:

>I picked up a PK-12 TNC and it seemed fine on packet, so I hoped to use it 
>for my UIView APRS Igate.  I ve tried a couple of the UIView config files, 
>looks like there are a couple commands not recognized that I have to 
>adjust, but the biggest problem is what I get out of the TNC.  Here is a 
>screen capture from a straight terminal program.  It appears to display 
>the correct path information when I hear the station directly, but when it 
>is digipeated, I get a string of digipeater callsigns in there.
>
>NEWPRT*>WIDE2-2>APN390 <UI>:
>@232402z4445.37NS12402.98W_000/000g000t040r000p000P000b10292.WxDG
>
>PATSY>NEWPRT>NEWPRT*>APN382 <UI>:
>$ULTW0000000001760245283E001897FF000103A70169015E00000000

This is standard TNC-2 compatible behavior,  and also for the PK-12. It's 
controlled by the MRpt command, which defaults to ON. Setting it to OFF 
will display only the originating and destination stations.

Roger Grady  K9OPO