[aprssig] Garmin GPS35

[Stan Coleman [NØYXV]]

GPS is connected directly to laptop running Garmin's configuration and setup
program. When you click on display NMEA output you get something like this
00.000000N 00.0000000W (you get the point). Currenlty I don't have it connected
to anything other than the laptop. Once I get that part working I can move on
and reconnect it to the TNC.
--
visit us online at
www.gihams.org


Quoting VE7GDH <ve7gdh at rac.ca>:

> Stan N0YXV wrote on Sept 27 2005
>
> > I'm having trouble with my Garmin GPS35. It was all working fine until
> > one day when it began sending a static location over and over no matter
> > where I drove. It appears to me like I need to reset this possible back to
> > the way it came from the factory. I've found a couple of hints on the
> > Garmin web site but was hoping that somebody else had experienced
> > this problem and knew of a good quick fix.
>
> What is it the GPS35 outputting? Try hooking it up to a serial port on a PC
> and fire up a terminal program and see if you can see the NMEA data stream.
> Preferably do this where the GPS can see the sky. Even better than a
> plain-jane terminal program, use something like VisualGPS or similar to
> display the data. Look for the freebie version at www.visualgps.net.
> Maybe the GPS isnput outputting any NMEA data at all.
>
> You can view documentation on the GPS35 at
> www.garmin.com/products/manual.jsp?product=010-00116-00
>
> What is the GPS35 connected to? TNC? Tracker? D7? D700? What
> I'm really trying to find out is if it is a device that can store a
> location. Maybe it is your tracker / TNC / D7 / D700 that has the
> static location stored in it.
>
> 73 es cul - Keith VE7GDH
> --
> "I may be lost, but I know exactly where I am!"
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>