[aprssig] Re: D700 PS2 conenctor & P L E A S E TRIM posts

[Steve Noskowicz]

Date: Tue, 06 Sep 2005 02:44:10 -0700
From: "Stephen H. Smith" <wa8lmf2 at aol.com>
Subject: [aprssig] Re:  D700 PS2 conenctor
To: TAPR APRS Mailing List <aprssig at lists.tapr.org>
vk4tec at tech-software.net wrote:

>What on earth is the PTT pin on the D700 ?
>I am using the PS2 connector [...snip...]

Pin 3 which Kenwood confusingly labels "Standby".   It's just a normal 
ground-to-key PTT line. [...snip...]

FYI:

In the ever growing world of the Borg (Software types), signal lines are labeled by the function they perform/cause in their _HIGH_ state.  When the PTT line is high, the transmitter is in standby.  It could also be called *Transmit  or /Transmit as these are other ways of putting the "not" bar above a name to indicate that it is named for the function when put _LOW_.

73, Steve, K;9.D'C,I

BOY, I wish you fellas would trim your posts for us Digest readers...

		
---------------------------------
 Click here to donate to the Hurricane Katrina relief effort.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20050907/0f2811bf/attachment.html>