[aprssig] PK232 TNC as WIDE1-1 digi?

[Stephen H. Smith]

bruninga at usna.edu wrote:

>Settign up a WIDE1-1 digi:
>
>There are only a few settings.
>1) Reset to factory defaults
>2) MYCALL  CALLSIGN
>3) BTEXT !DDMM.hhN1DDDMM.hhW#W1-1 any_other-comment_here
>4) B E 600 (what ever is equal to 10 minutes)
>5) UNPROTO APN232   <ID's it as a PK232)
>6) HID OFF
>
>That is all there is to it.
>
>de Wb4APR, Bob
>  
>
>>>>lists.nospam at bpsmicro.com 11/18/05 8:59 AM >>>
>>>>        
>>>>
>A local group wants to set up an APRS digi in their area. I've been
>following the region, and I've convinced them that we don't really need a
>Wide-area digi there, but a fill-in would definitely be useful (there are a
>few RF holes in the vicinity). This works out, because they only have an old
>PK232 digi, which I understand isn't suitable for WIDEn-N use.
> 
>  
>

You overlooked perhaps the most important one (assuming that CALLSIGN is 
the actual call of the station for ID purposes):

Set MYA (myalias) to "WIDE1-1" to enable response to the generic 
digipeater call WIDE1-1   





Stephen H. Smith    wa8lmf (at) aol.com
EchoLink Node:      14400    [Think bottom of the 2M band]
Home Page:          http://wa8lmf.com

"APRS 101"  Explanation of APRS Path Selection & Digipeating
  http://webs.lanset.com/wa8lmf/DigiPaths

Updated APRS Symbol Chart
  http://webs.lanset.com/wa8lmf/miscinfo/APRS_Symbol_Chart.pdf   

New/Updated "Rev G" APRS     http://webs.lanset.com/wa8lmf/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20051118/dfdf18ad/attachment.html>