[aprssig] Any more changes?

Robert Bruninga bruninga at usna.edu
Wed May 11 10:42:19 EDT 2005

>>> Richard Montgomery <kb4ytm at gmail.com> 5/11/2005 9:51:58 
>I dunno about the UIDigi though, I have been 
>waiting on a 'fix' for the timing issues and there 
>were concerns it didnt do widen-n properly from 
>what I have read on here.

The timing issue work-around is to simply set one
of them to something like every 12 minutes DIRECT, 
one every 35 minutes via WIDE2-1 and one every 
73 minutes to WIDE2-2?  (There should be an
optimum setting to minimize their occassionaly
occuring at the same time, but I have not had time
to work it out)...

The WIDE1-1 problem is solved by putting WIDE1-1
in the ALIAS list...

Bob, Wb4APR

APRS Traffic map for WEST TN

Bruce, KQ4TV wrote:
> I plan to spend 8-10 hours Friday going to each of the digis that I 
> manage and reprogram them to the New n-N Paradigm standards.
> I have two UIdigi and one KPC3 v8.2 digis. I need to burn the UIdigi

> eproms Thursday afternoon.
> I burned an eprom and changed one digi only to have everything change

> within days making the programming nearly obsolete though still
> I reprogrammed the KPC3 only to find out the next day that the 
> recommendations had changed and that digi became unusable.
> Are there any more changes being contemplated?
> I have a question concerning the UIdigi programming.
> How should the UIFLOODOptions  parameter be set?
> // UIFLOOD Algorithm flag  (default 0)
> //  bit 0 make call substitution after the last WIDEn-n digied
> //  bit 1 insert callsign before WIDEn-n
> // UIFLDfl [n]
> UIFLOODOptions         =       1
> Bruce, KQ4TV
> -- 
> Bruce W. Martin, KQ4TV
> Trustee for NT4UX
> Nashville Linux User Group - Amateur Radio- Special Interest Group
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org 
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig 


aprssig mailing list
aprssig at lists.tapr.org 

More information about the aprssig mailing list