[aprssig] Any more changes?

[Robert Bruninga]

For what it's worth... This solution does not support 
the WIDE1-1,WIDE2-1 option.  To do that in a 
UIDIGI ROM, the WIDE1-1 has to be listed as an
alias...   Bob

>>> "Ed L. Locklear, KF4CHG" <kf4chg at earthlink.net> 5/11/2005 9:47:54
AM >>>
Bruce, KQ4TV wrote:

> I plan to spend 8-10 hours Friday going to each of the digis that I 
> manage and reprogram them to the New n-N Paradigm standards.
> I have two UIdigi and one KPC3 v8.2 digis. I need to burn the UIdigi

> eproms Thursday afternoon.
> I burned an eprom and changed one digi only to have everything change

> within days making the programming nearly obsolete though still
usable. 
> I reprogrammed the KPC3 only to find out the next day that the 
> recommendations had changed and that digi became unusable.
> 
> Are there any more changes being contemplated?
> 
> I have a question concerning the UIdigi programming.
> How should the UIFLOODOptions  parameter be set?
> 
> // UIFLOOD Algorithm flag  (default 0)
> //  bit 0 make call substitution after the last WIDEn-n digied
> //  bit 1 insert callsign before WIDEn-n
> // UIFLDfl [n]
> UIFLOODOptions         =       1
> 
> 
> 
> Bruce, KQ4TV
> -- 
> Bruce W. Martin, KQ4TV
> Trustee for NT4UX
> Nashville Linux User Group - Amateur Radio- Special Interest Group
> NLUG-AR-SIG

Bruce,

This is how I have our digi NF4CQ-10 here in North Central Florida
set.

UIDigiCall = WIDE3-1, WIDE3-2, WIDE3-3, WIDE4-1, WIDE4-2, WIDE4-3, 
WIDE4-4, WIDE5-5

UIFloodCall            = FL
UITraceCall            = WIDE
TxDelay                = 30
PPersistance           = 255
SlotTime               = 1
Frack                  = 4 <= Default 5, changed to match KPC3+.
DuplicateSuppression   = 30
UIFLOODOptions         = 0
UITRACEOptions         = 0
UIDIGICallSubstitution = 1
Beacon1Interval        = 600
Beacon2Interval        = 2400
Beacon3Interval        = 4800
Beacon1Offset          = 0
Beacon2Offset          = 0
Beacon3Offset          = 0

I used N8DEU web site as a reference.
http://www.qsl.net/n8deu/uidigi_eprom_settings.htm 

Ed, KF4CHG



_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org 
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig