[aprssig] Kenwood D700 and UI-VIEW

[Andrew Rich]

The D700 has to be in packed mode (TNC PKT top left on the radio) the

GPS go's into the radio via the 2.5 mm socket

ui-view's set up

Gps setup

com port 1

shared port setup   D7/D700


Kiely
ZL1KM


-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Andrew Rich
Sent: Sunday, 1 May 2005 9:25 AM
To: aprssig
Subject: [aprssig] Kenwood D700 and UI-VIEW


Am I missing something ?

1) I put UI-VIEW to talk to a D700, all good and well - D700 responds TNC
mode
2) TNC in D700 puts out "VK4TEC>GPS <UI> C $GPRMC.......................etc
3) But UI-VIEW just thinks it is a station, which shows up on the screen
...like it should

My question is, how do you get ui-view to "know" that this is really YOU
mobile and you want to send the position ?

Apart from double jumpering the GPS into a com port and setting up UI-VIEW
that way ?

Ideas ?

Andy VK4TEC


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig