[aprssig] Universal digi path

[n4qwf at ntelos.net]

Thanks for the info. I sure was wondering there what had happened. Guess
the sensitivity might be the problem. I never had any trouble from the
high rise at Oregan Inlet till this trip.

I hope at some point a digi path that will work anywhere will be resolved
from all the changes that have been made. Concerns over congestion seems
to have disrupted the travelers ability to get back to home area. Well, we
will see what comes of it all after things have a chance to settle down. I
would hope that at some point the traveler will be able to set a path and
be seen anywhere. Again thanks for the help. 73's << John
> Just to let you know that the digi that covers the outer banks does
> support WIDEn-N and SSn-N but is having some antenna problems. A local
> Igate also  supports RELAY and, WIDE1-1. If you go far south on the outer
> banks there is no APRS coverage. Also the digis that had WIDEn-N removed
> it has been put back in.
>
> John
> KE4TZN
>>
>> From: "Cap Pennell" <cap at cruzio.com>
>> Date: 2005/06/16 Thu PM 10:57:46 EDT
>> To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
>> Subject: RE: [aprssig] Universal digi path
>>
>> Have you tried plain WIDE2-2 ?  I see stations nearby you using it
>> successfully.  Good luck.
>> Some digis "cut-off" WIDE3-3 as too broad, but allow WIDE2-2 (or
>> WIDE1-1,WIDE2-1).
>> 73, Cap KE6AFE
>>
>> > -----Original Message-----
>> > From: aprssig-bounces at lists.tapr.org
>> > [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of n4qwf at ntelos.net
>> > Sent: Thursday, June 16, 2005 17:09 PM
>> > To: aprssig at lists.tapr.org
>> > Subject: [aprssig] Universal digi path
>> >
>> >
>> > Here I am on the outer banks of North Carolina. I was here two weeks
>> ago
>> > and enjoyed seeing my position reported on Findu without any problem.
>> I
>> > was using the Tiny track and Kenwood V7A in my wifes car then. I am
>> sure
>> > the Proto path was set to Wide3-3. While I have been here this week
>> using
>> > my D700 and the same path I don't see my position digipeated. I see
>> other
>> > stations on my screen without any trouble and the node shows up all ok
>> but
>> > no ack of my postion. I setup my D7 HT and monitored my transmissions
>> and
>> > I showed up on my Winaprs map here at the house so I know I am sending
>> a
>> > good positions. When I left home the Wide 3-3 worked just fine till I
>> got
>> > to Currituck and then it stopped working. My question is has the alias
>> of
>> > the path been changed or something. I have tried the call of the node,
>> > Wide, Wide1-1, Wide3-3, relay, NC1-1 among many proto paths without
>> any
>> > lucky. I would think there should be a path setting that should work
>> > regardless of where you travel. If that is not the case what is a
>> fellow
>> > to do while on the road. After all that is what APRS was supposed to
>> be
>> > about I thought. Well maybe someone can clue me in on what gives.
>> Thanks
>> > for any help! 73's << John
>> >
>>
>>
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at lists.tapr.org
>> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>