[aprssig] KPC3+

[Robert Bruninga]

>>> Matt Werner <kb0kqa at gmail.com> 06/06/05 8:17 PM >>>
>Bob - I have a similar question as Bill did. 
> I don't think you really answered his question though.
>He already HAS a 9.0 ROM.  Is this usable as a digi?

Let me try again.  To use a KPC-3+ as a digi, plan 
on getting a new 9.0+ ROM.   Kantronics will be 
announcing how to get new ROMS soon.... 

On 6/6/05, Robert Bruninga <bruninga at usna.edu> wrote:
> For a digi, plan on getting a new 9.0+ ROM.
> Kantronics will be announcing how to get new
> ROMS soon.... BOb
> 
> 
> >>> ne1b at adelphia.net 06/06/05 8:04 PM >>>
> I am located in a rural area of NH where mobile tracking is marginal, so I
> acquired a KPC 3+ with Ver. 9.0. for a "fill-in" digi.
> 
> While reading your latest recommendations for setting this up, I read this
> item below that Version 9.0 should not be used at a DIGI.  Is that true?  I
> was all set to type in APN390.
> 
> Your TOCALL in both the UNPROTO and the LTP's should use the
> TOCALL of APN383 where APN identifies it as digipeater firmware.   The
> "3" identifies it as a KPC-3 and the "83" identifies it as ROM version.
> NOTE, that settings for -early- version 8.2 ROMS are different and in
> a different file, and that version 9.0 should not be used at a DIGI, or
> should be upgraded to the next Kantronics release.  See the APRS list of
> TOCALL versions for details of this naming convention.
> 
> Bill
> NE1B
> 
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org 
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig 
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org 
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig 
>

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org 
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig