[aprssig] APRS Satellite filter

[Roger Bille]

 Andrew,

 I'm not 100% sure what you looking for but I will try to answer.

 If you want to get packets originated from PCSAT/PCSAT2/ISS then use the p
or b filter, e.g.

 p/W3ADO/RS0ISS/PCSAT/PC2/ISS
or
 b/W3ADO/RS0ISS/PCSAT*/PC2*/ISS*

 The above will NOT pass packets that has digipeated through
PCSAT/PCSAT2/ISS. Then you need to use the d filter. This will look through
the digi path after the * and pass packets that has been digipeatered. The d
filter do not allow wildcard. Maybe Bob can answer which callsigns is used
in the digi path. 

 d/W3ADO/RS0ISS/PCSAT/PCSAT2/PC2ISS/PC2RPT... 

 You can then combine these to get both packets originated by the satillites
and traffic that has pass through the satillites.

 73 de Roger/sm5nrk

> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org [mailto:aprssig-
> bounces at lists.tapr.org] On Behalf Of Andrew Rich
> Sent: den 30 juli 2005 05:22
> To: TAPR APRS Mailing List
> Cc: Ozaprs
> Subject: [aprssig] APRS Satellite filter
> 
> What is the best javAPRS filter to capture space stuff ?
> 
> p /W3ADO/RS0ISS/PCSAT ?
> 
> that should get
> 
> W3ADO*
> RS0ISS*
> PCSAT*
> 
> ??
> 
> Andrew vk4tec
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig