[aprssig] D700 TNC hangs

[Andrew Rich]

I have seen this too

I started out doing full resets

Put then I found a PM reset does the same thing

-------------------

My d700 tx'es when the GPS is in V NMEA mode

My friends d700 does not TX until a valid fix is determined by the GPS

Is this a setting ?
  -----Original Message-----
  From: Andy Gonzales [mailto:KG6RWO at comcast.net]
  Sent: Thursday, 14 July 2005 11:39 AM
  To: aprssig at lists.tapr.org
  Subject: [aprssig] D700 TNC hangs


  Occasionally after using the 700 in PKT mode while connected to UIVIEW, I
cannot get back to APRS mode after disconnecting the application.  I can go
from PKT to "off", but then when trying to get back to APRS I get the
OPENING TNC message but nothing else.  I have to do a partial memory reset.
I should add that sometimes I have been using PE PRO in KISS mode.

  I suspect that when I break the connection, something may not get to the
TNC to let it know.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20050717/1cb8f87d/attachment.html>