[aprssig] Fwd: Kantronics Temperature Specifications

[Brian B. Riley]

I would guess the answer is a compromise .... Its not a Œtypical ham
installation¹ ... its gonna go somewhere quite inhospitable or you wouldn¹t
be asking the question. The location if not actually an available nook in a
commercial tower will be functionally the same as a remote commercial
installation.


On 1/24/05 5:00 PM, "John Denison" <kd5you at houston.rr.com> wrote:

> I sent an email to Kantronics on the KPC 3+, and received the following reply:
> 
> Nearly all of the components inside the KPC-3 Plus have temperature rating
> of 0 to 70 degrees c (in non-condensing humidity up to 90 percent).
> 
> So, the high end of the operating range is less than that.  It draws very
> low current (15 to 25 ma, depending on number of leds lighted), and
> generates very little internal heat.
> 
> Is this for a commercial installation, or the typical ham installation?
> 
> Ken.
> Kantronics Technical Service


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20050128/f94b04cb/attachment.html>