[aprssig] Fwd: Kantronics Temperature Specifications

[gervais fillion]

hi Ryan,
if that can inform you ,i have one here with a Kenwood tk-705 as a digi.
it is located in a shed that has no heat ,just electricity for our repeater.
at about -20 in the shed ,it is beginning to have difficult tx and rx too so
to resolve this problem i have been at Wall-Mart and baught a little 
container that is used to store,,,,,,beer.
i install the tnc and the radio in it and the heat that the radio is 
generate heats the inside of the container.
simple and cost me 6.95 cnd

but
leave a open space to exhaust the to high temperature

you could install a pc fan to circulate the heat too

73/s
gervais,ve2ckn

>From: Ryan Tourge <k2rrt.lists at gmail.com>
>Reply-To: Ryan Tourge <k2rrt.lists at gmail.com>,TAPR APRS Mailing List 
><aprssig at lists.tapr.org>
>To: TAPR APRS Mailing List <aprssig at lists.tapr.org>
>Subject: [aprssig] Fwd: Kantronics Temperature Specifications
>Date: Fri, 21 Jan 2005 10:00:42 -0500
>
>I've searched around to find the temperature operating limits for the
>Kantronics KPC-3+ and the Vertex VX-150. I havn't been able to find
>much. Has anyone else researched this?
>
>Thanks!
>
>--
>Ryan Tourge - K2RRT
>email: k2rrt_at_tourge.net
>lists:   k2rrt.lists_at_gmail.com
>web:   http://k2rrt.tourge.net
>I have 6 Gmail invites available
>
>_______________________________________________
>aprssig mailing list
>aprssig at lists.tapr.org
>https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig