[aprssig] Digipeating with TM-D700A

Ken Kinyon w7ts at comcast.net
Fri Jan 14 20:03:53 EST 2005


In trying Bob's offset Digipeating, I have run into the following problem:
With the A band in the VFO position.  Even though the + or - is showing on
the display, the transmit frequency will not offset.  It transmits on the
receive frequency.  I have checked two of my D700s and they both act this
way.  It is not because the transmit frequency would be out of the band. I
have checked for that.  B band works fine.
Any ideas what I have set wrong?
Thanks,
Ken W7TS

-------------------
Kenneth E.  Kinyon
34 Princeton Circle
Longmont, CO 80503-2106
-----------------------
E-mail: W7TS at comcast.net
------------------

-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Ken Kinyon
Sent: Friday, January 14, 2005 4:32
To: 'TAPR APRS Mailing List'
Subject: RE: [aprssig] Digipeating with TM-D700A


"In fact, set up the radio for SPLIT operation.  The D700
receives area packets on 144.39 then digipeats them to 144.99
where the D7 inside hears them and yet you are not QRMing the
otehr users at all..
Bob"

Great idea, I will try that.
Thanks,
Ken


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig






More information about the aprssig mailing list