[aprssig] Re: iRLP

[A.J. Farmer]

Great.  I'll check it out.  Thanks for the info!

73!

A.J. Farmer, AJ3U
http://www.aj3u.com
 

-----Original Message-----
From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org]
On Behalf Of Dennis Hudson
Sent: Tuesday, January 04, 2005 10:34 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] Re: iRLP

The beacons you see are generated individually by the node. There are a 
number of different scripts out there. I have used the one written by 
Geoff VK2XJG and is available at http://redhat.irlp.net/

It can beacon to the RF network from a number of methods, serial to 
TNC, UDP to an aprsd port, or via the APRS-IS to a local reverse igate. 
Geoff's scripts show how to format the beacon for D700/D7 displays as 
recommended by Bob Bruninga.



On Jan 4, 2005, at 10:17 PM, A.J. Farmer wrote:

> Very interesting.  Does anyone know how this is being done?  I tried 
> some
> searches on Google for APRS and IRLP, etc but I didn't come up with 
> anything
> solid.  Most of the nodes are gated by a station identified as "IRLPGW"
> which also turned out to be a dead end.


--
Dennis Hudson, N2LBT
Sysop APRSALY
http://n2lbt.com:14501
Albany, NY


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig