[aprssig] New WIDEn-N Paradigm (MAJOR MOD)
Greg Noneman
greg at clubnet.net
Sun Feb 6 15:46:32 EST 2005
On Feb 6, 2005, at 11:51 AM, Ron Stordahl wrote:
>
> I am not at all sure this will work with the UIDIGI firmware for
> TNC2's. Of course I should have checked this before speaking up, but
> perhaps someone has checked and can confirm or deny? If as I suspect
> it doesn't, then really you are only talking about KPC3's. There are
> a lot of UIDIGI's out there, particularly in NW Minnesota where 90%
> are that type.
>
> The best bet would be for the UIDIGI author to simply implement a
> limit on N, can't be that hard.
>
> No one better than you, as the high muckymuck of APRS, to try to twist
> the authors arm. He doesn't pay any attention to me.
>
> Ron, N5IN
>
Ron,
The filtering function using the UIDIGI parameter does work with
Marco's UIDIGI ROM firmware. We have just implemented a change in the
Los Angeles area which employs two KPC-3 TNCs and one TNC-2 with
UIDIGI. Before the filter approach was considered, the functionality
was tested on the UIDIGI firmware. As with the KPC-3, the UIDIGI
parameter is acted upon prior to UIFLOOD or UITRACE. UIDIGI ROM
actually has an advantage over the KPC-3 in that it allows up to 8
entries in the UIDIGI parameter (vs. 4 in the KPC-3) so more WIDEn-N
combinations can be filtered-out.
You are correct however. The best solution would be a firmware mod to
allow a selectable limit on the WIDEn-N flooding. Maybe Marco can be
persuaded.
Greg
WB6ZSU
More information about the aprssig
mailing list