[aprssig] how to implement 'No more relay' for dummies- settingsfor ui-digi

[Ron Stordahl]

Hasan

Do you mean UIDIGI or UIView32?  The question was for UIDIGI, however I 
am interested in both.  Could you please give us your MSG# as the search 
in Yahoo Groups is awful!  And which group?

Ron, N5IN

hasan schiers wrote:

> Go the the UI-View32 mailing list page at Yahoo (the groups area). You 
> will find an article explaining it "by the numbers". I wrote it.
>
> 73,
>
> ...hasan, N0AN
> ----- Original Message ----- From: "Brian Webster" 
> <bwebster at wirelessmapping.com>
> To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
> Sent: Tuesday, April 05, 2005 8:19 PM
> Subject: RE: [aprssig] how to implement 'No more relay' for dummies- 
> settingsfor ui-digi
>
>
>> Can anyone point me to a web page that will show settings for ui-digi 
>> to set
>> it up properly to use the new wide-n scheme?
>>
>>
>>
>> Brian, N2KGC
>>
>>
>> -----Original Message-----
>> From: Wes Johnston [mailto:aprs at kd4rdb.com]
>> Sent: Tuesday, April 05, 2005 1:15 PM
>> To: TAPR APRS Mailing List
>> Subject: [aprssig] how to implement 'No more relay' for dummies
>>
>>
>> Short and to the point (I hope)....  I know some of these threads get
>> long and people begin to glaze over... here is the summary:
>>
>> ----------------------------------------------------------------------
>> If you are a home station....
>> and you use a real TNC in serial mode Change the TNC parameter MYA from
>> RELAY to WIDE1-1
>>
>> or you use UI-View with a TNC in KISS mode, simply remove RELAY as a
>> supported alias and replace it with WIDE1-1.
>>
>> or you use WINAPRS, change your TNC startup file and replace MYA RELAY
>> to MYA WIDE1-1 .
>>
>> ----------------------------------------------------------------------
>> If you are a mobile station....
>> change your outbound path to WIDE1-1,WIDE2-1 or WIDE1-1,WIDE2-2
>>
>> WIDE2-2 will work everywhere, but you'll loose the ability to bounce
>> packets off someone's house when you are in the boonies.
>>
>> ----------------------------------------------------------------------
>> If you are a digi owner...
>> you don't have to do anything!
>>
>> After a transition period, you may wish to drop the word RELAY from your
>> UIDIGI list.
>>
>> Wes
>>
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at lists.tapr.org
>> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>
>>
>>
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at lists.tapr.org
>> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig