[aprssig] The final WIDE2-1,WIDE1-1 solution! UI-View digipeater

John Johnson Ke4tzn at cox.net
Sat Apr 2 08:52:42 EST 2005


In UI-View all you have to do is go into the digipeater setup under
Alis(es) and take out RELAY and replace it with WIDE1-1. 

John Johnson
KE4TZN

-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org] On Behalf Of Wes Johnston
Sent: Saturday, April 02, 2005 8:27 AM
To: TAPR APRS Mailing List; schiers at netins.net
Subject: Re: [aprssig] The final WIDE2-1,WIDE1-1 solution!

If you are talking about using UI-View for a wide digipeater, then yes,
just take RELAY out of it.  If you are talking about using UI-View as a
home station RELAY, then the word "relay" woul have to be substituted
for the word "wide1-1".  I'm not up to speed on UI-View, so I don't know
where to do this... I suspect it's in the INI file.

For KPC3 and PACCOMM home stations, they need to change from MYA RELAY
to MYA WIDE1-1 .

Wes

hasan schiers wrote:

> Do we do nothing differently than I had earlier published than just
> eliminating support for RELAY?
>
> It would seem to me that we don't have to do anything...just take
> RELAY out of our ALIAS list and let UI-View32 do its thing.
>
> This way the only change required is the mobiles' unproto path changes
> from:
>
> RELAY,WIDE2-2  (pretty much the standard around here...we're rural
> with high digis)
>
> to:
>
> WIDE1-1,WIDE2-2   (for three hops)
>
> or
>
> WIDE1-1,WIDE2-1 (for two hops)
>
> ======================================
> We are having a state-wide APRS meeting at the Des Moines hamfest the
> 3rd week of this month. It would be nice to get everyone on the same
> page at that meeting.
>
> 73,
>
> ...hasan, N0AN
>
> ----- Original Message ----- From: "Robert Bruninga"
<bruninga at usna.edu>
> To: <aprs at kd4rdb.com>; <aprssig at lists.tapr.org>
> Sent: Friday, April 01, 2005 2:39 PM
> Subject: Re: [aprssig] The final WIDE2-1,WIDE1-1 solution!
>
>
>> And now the New n-N Paradigm is complete!
>>
>> 1) WIDEn-N works everywhere for small values of N
>> 2) The RELAY-DUPE and WIDE-DUPE problems are solved
>> 3) We can still use fill-in digis
>>
>> and APRS paths are totally simplified to simply WIDEn-N
>> and 2-2 for mobiles and the 1-1,2-1 options for those mobiles
>> that think they need it..  Wow , what a day!
>>
>> Bob
>>
>>>>> bruninga at usna.edu 4/1/05 3:09:49 PM >>>
>>>>
>> Wes, I think you got it!
>>
>> 1) We replace RELAY stations with WIDE1-1 stations.
>> 2) The general mobile path is WIDE2-2  (or 3-3 if one insists)
>> 3)  for those indifviduals that insist they need a fill-in-digi can
>> use either of these paths:
>>
>> WIDE1-1,WIDE2-2      (in areas that can handle 3 hops)
>> WIDE1-1,WIDE2-1      (in WIDE2-2 areas)
>>
>> This completely eliminates the RELAY-DUPE-multiplication
>> problem and is fully compatible with the New n-N Paradigm.
>> But may not work in LA or areas with WIDE2-2-only digis,
>> though I think we can fix that too...
>
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig



_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.1 - Release Date: 4/1/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.1 - Release Date: 4/1/2005
 





More information about the aprssig mailing list