[aprssig] troubleshoot MFJ-1270B?

Bob Gould bobg575 at yahoo.com
Tue Sep 14 19:18:08 EDT 2004


Note sure if this will help but I have been working on
an MFJ1278. When I powered up the TNC it did just as
you described. It took me a while to figure out what
was going on. It turned out to be that the TNC was in
KISS mode when last used. Hope this helps.

Bob
N1WJO


--- Chris Kantarjiev <cak at dimebank.com> wrote:

> I just picked up a 1270B TNC, with the intent to
> turn it into a RELAY
> APRS digipeater. When I apply power, I get lights on
> STA CON PWR,
> and they all stay on. No serial communication so
> far. The ROM
> inside is marked SYSTEM TNC 2 1.2.8 - 32K.
> 
> I've got some information here, but am wondering if
> this might be
> a commonly known problem, before I start poking with
> the oscope?
> 
> Also, will this version of the ROM support RELAY
> operation, or 
> should I be planning to upgrade? To what, UIDIGII?
> 
> Thanks,
> chris
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
>
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 



		
__________________________________
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
http://promotions.yahoo.com/new_mail




More information about the aprssig mailing list