[aprssig] UI-DIGI settings
bruninga at usna.edu
Tue Aug 31 09:23:25 EDT 2004
can you explain that site? Do I understand correctly
that the listed parameters are the UI-DIGI defaults and
that your receommendations are in the text added to
If the shown values are the "defaults" we need to get
the author of UI-DIGI to change some of them.
(having WIDE7-7 as a default is a travesty...)
Im half way thoruogh reading them, but I may want to
work with you on some of them...
>>> tim_cunningham at mindspring.com 8/30/04 1:27:04 PM >>>
I documented some of the settings and their effect at this site:
----- Original Message -----
From: "Robert Bruninga" <bruninga at usna.edu>
To: <aprssig at lists.tapr.org>
Sent: Monday, August 30, 2004 11:47 AM
Subject: [aprssig] UI-DIGI settings
> Concerning UI-DIGI settings.
> My experience and WEB pages are based on KPC-3+
> and so I need to confirm the equivalent settings for
> a UI-DIGI with regard to improving the APRS channel:
> I believe:
> *** UI FLOOD ALGORITHM should be 0 not 1.
> This disables the forced obliteration of prior
> path data at each digi... (equivalent to NOID)
> *** DIGI beacon rates. Only 3 are available instead
> of the four in the KPC-3+. So to get a LOCAL 10
> minute rate and a 2 hop 30 minute rate I think it
> should be:
> PATH 1 = (direct)
> PATH 2 = (direct)
> PATH 3 = WIDE2-2
> RATE 1 = 30 min
> RATE 2 = 30 min
> RATE 3 = 30 min
> OFFSET1 = 0
> OFFSET2 = 10
> OFFSET3 = 20
> And all three BEACON TEXTS must be identical.
> Otherwise APRS software sees each different one
> as a CHANGED position and this fills up peoples
> LOG files...
> THe above system will generate one packet
> locally every 10 minutes and one 3 hop packet
> once every 30 minutes. which is about right.
> Did I get this right?
> Bob, Wb4APR
aprssig mailing list
aprssig at lists.tapr.org
More information about the aprssig