[aprssig] APRS tone encode question
Andrew Rich
vk4tec at tech-software.net
Wed Aug 25 16:10:38 EDT 2004
Scott,
So how many "cycles" of 1200 or 2200 fit into the period allowed for 1200
baud ?
-----Original Message-----
From: Scott Miller [mailto:scott at 3xf.com]On Behalf Of scott at opentrac.org
Sent: Wednesday, 25 August 2004 4:22 PM
To: vk4tec at tech-software.net; 'TAPR APRS Mailing List'
Subject: RE: [aprssig] APRS tone encode question
It just means that when you switch from one tone to the other, you stay at
the same place in the waveform. You get a sine wave that's stretched and
compressed in places, but it doesn't have any jumps or flat spots in it.
Scott
N1VG
-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Andrew Rich
Sent: Tuesday, August 24, 2004 10:33 PM
To: Scott Miller; 'TAPR APRS Mailing List'
Subject: RE: [aprssig] APRS tone encode question
what is phase continuous ?
-----Original Message-----
From: Scott Miller [mailto:scott at 3xf.com]
Sent: Tuesday, 24 August 2004 11:41 PM
To: vk4tec at tech-software.net; 'TAPR APRS Mailing List'
Subject: RE: [aprssig] APRS tone encode question
No, it requires that the phase be continuous. Since 2200 isn't an
even multiple of 1200 baud it wouldn't come out even anyway. In the
OpenTracker, a pointer to the current sine value is incremented each step.
The size of the increment depends on which tone is being sent at the moment.
Scott
N1VG
-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Andrew Rich
Sent: Tuesday, August 24, 2004 1:58 AM
To: TAPR APRS Mailing List
Subject: RE: [aprssig] APRS tone encode question
Does Packet require the tone shift from 1200 to 2200 to occur at a
zero crossing ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20040826/feba15c6/attachment.html>
More information about the aprssig
mailing list