<div dir="ltr"><div dir="ltr">Tom <div><br></div><div>The confusing thing is that the program uses systemd and ip multicast. </div><div><br></div><div>Warning the computer should not have WiFi . Local traffic traffic is 4.87 Mibps</div><div><br></div><div>Use btop to monitor the computer CPU and </div><div>iptop to monitor the multicast</div><div><br></div><div>I start the the radio with the first time</div><div><br></div><div>radiod radiod@rx888-generic.conf &<br></div><div><br></div><div>sudo systemctl start radiod radiod@rx888-generic.conf </div><div>sudo systemctl stop radiod radiod@rx888-generic.conf<br></div><div><br></div><div>after the first start.</div><div><br></div><div>Phil and Rob are making changes all the time right now and the instructions are changing with an aim to make it easier to use.</div><div><br></div><div>I listen to wspr with </div><div><br></div><div>wspr-decoded wspr-pcm.local &<br></div><div><br></div><div>This command has no output until the 2 minute decode. The initial setting decodes to local files. There is no auto upload the <a href="http://wsprnet.org">wsprnet.org</a></div><div><br></div><div><br></div><div>Also if you do not have a permanent Linux box.</div><div><br></div><div>you can try rx888 with SDRConsole on Windows only. This is Simon Brown's windows only program and more like Linhpsdr.</div><div><br></div><div>I hope this helps.</div><div><br></div><div>I am working on documentation at </div><div><a href="https://github.com/LarsenDR/Radio-Docs">https://github.com/LarsenDR/Radio-Docs</a><br></div><div><br></div><div>Dave KV0S</div><div><br></div><div><br></div><div><br></div></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Jul 24, 2023 at 10:30 PM Tom McDermott via TangerineSDR <<a href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div dir="auto">Hi Bill. I do not know about edits to the makefile, are those documented somewhere?</div><div dir="auto">I ran make (and make install) on the makefile as distributed by git (unedited) and it completed without errors. It created <br></div><div>rx888.o but no file called rx888d.something<br></div><div dir="auto"><div dir="auto"><br></div><div dir="auto">-- Tom, N5EG <br><div dir="auto"><br></div><div dir="auto"><br></div></div></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Jul 24, 2023, 6:31 PM Bill Engelke via TangerineSDR <<a href="mailto:tangerinesdr@lists.tapr.org" target="_blank">tangerinesdr@lists.tapr.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div lang="EN-US">
<div>
<p class="MsoNormal">Tom – did you edit the makefile and run a make? You have to compile rx888d – 73- Bill<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><b>From:</b> TangerineSDR <<a href="mailto:tangerinesdr-bounces@lists.tapr.org" rel="noreferrer" target="_blank">tangerinesdr-bounces@lists.tapr.org</a>>
<b>On Behalf Of </b>Tom McDermott via TangerineSDR<br>
<b>Sent:</b> Monday, July 24, 2023 6:40 PM<br>
<b>To:</b> <a href="mailto:hamsci@googlegroups.com" rel="noreferrer" target="_blank">hamsci@googlegroups.com</a>; TAPR TangerineSDR Modular Software Defined Radio <<a href="mailto:tangerinesdr@lists.tapr.org" rel="noreferrer" target="_blank">tangerinesdr@lists.tapr.org</a>><br>
<b>Cc:</b> Tom McDermott <<a href="mailto:tom.n5eg@gmail.com" rel="noreferrer" target="_blank">tom.n5eg@gmail.com</a>><br>
<b>Subject:</b> [EXTERNAL] [TangerineSDR] RX888D - how to start ?<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<div>
<p class="MsoNormal">The RX888D MKII has been received, installed ka9q-radio, created fft nwisdom, installed & started avahi.<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal">In trying to start rx888d as standalone, and as daemon, there seem to be missing some files.
<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal">./rx888d g5rv & - fails no such file or directory<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal">The only things $find / -name 'rx88*' found are:<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal"><a href="mailto:/home/tom/ka9q-radio/rx888d@.service" rel="noreferrer" target="_blank">/home/tom/ka9q-radio/rx888d@.service</a><br>
/home/tom/ka9q-radio/rx888.h<br>
/home/tom/ka9q-radio/rx888.o<br>
/home/tom/ka9q-radio/rx888.c<br>
/home/tom/ka9q-radio/rx888d.conf<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal">Thus the command(s) to run rx888d fail. Was an rx888d executable supposed to be generated?<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal">-- Tom, N5EG<u></u><u></u></p>
</div>
</div>
</div>
</div>
-- <br>
TangerineSDR mailing list<br>
<a href="mailto:TangerineSDR@lists.tapr.org" rel="noreferrer" target="_blank">TangerineSDR@lists.tapr.org</a><br>
<a href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org" rel="noreferrer noreferrer" target="_blank">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a><br>
</blockquote></div>
-- <br>
TangerineSDR mailing list<br>
<a href="mailto:TangerineSDR@lists.tapr.org" target="_blank">TangerineSDR@lists.tapr.org</a><br>
<a href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org" rel="noreferrer" target="_blank">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a><br>
</blockquote></div><br clear="all"><div><br></div><span class="gmail_signature_prefix">-- </span><br><div dir="ltr" class="gmail_signature">KV0S - Dave Larsen<br>Columbia, MO, USA</div>