<div dir="ltr"><div dir="auto">Hi Bob,<br>
<br>
I have never used a SuperSID receiver before or the Windows or Python software. <br>
<br>
I use a Pi 3 with Audio Injector Stereo. My VLF receiver is an E-field receiver based on an AD744 frontend. The antenna is copper tape attached to a length of foam pipe insulation placed inside a PVC pipe. The receiver also requires a good earth ground connection that is fairly well isolated from mains hum sources.<br></div><div dir="auto"><br></div><div dir="auto">I believe the SuperSID receiver circuit uses filters to pass the portion of the band containing VLF transmitters. To test your SuperSID and antenna placement, you can do the following:</div><div dir="auto"><br></div><div dir="auto">Download vlfrx-tools source on your Pi, build it, and install it. Here is the <a href="http://abelian.org/vlfrx-tools/">link</a> that includes install documentation and dependencies. </div><div dir="auto"><br></div><div dir="auto">With the SuperSID receiver connected to the left channel of the Audio Injector and receiving a signal, run the following in a terminal window as root:</div><div dir="auto"><br></div><div dir="auto">vtcard -d hw:0,0 -b32 -r96000 -c2 -g-1 -v @raw<br></div><div dir="auto"><br></div><div dir="auto">You should see it print messages. The first 4 would be "setup" messages, then the rest should be "run" messages. Once it starts printing run messages, it's capturing from the soundcard and outputting the stream to a buffer called @raw.</div><div dir="auto"><br></div><div dir="auto">In another terminal window under X windows or X forwarding, run the following as any user:</div><div dir="auto"><br></div><div dir="auto">vtspec @raw:1<br></div><div dir="auto"><br></div><div>This will show a live spectrum plot. Here is an example of mine showing various peaks indicating VLF transmitters:</div><div><br></div><div><img src="cid:ii_l7rfz0mq0" alt="Screen Shot 2022-08-01 at 10.29.59 PM.png" width="562" height="221"><br></div><div><br></div><div>You can then adjust the loop for the best signal and null out interference. </div><div><br></div><div>Here are some examples of my plots for 9/5 showing some SIDs on both NAA and NML:</div><div><br></div><div><img src="cid:ii_l7rg119q1" alt="Screen Shot 2022-09-05 at 9.28.15 PM.png" width="562" height="436"><br></div><div><img src="cid:ii_l7rg1yh22" alt="Screen Shot 2022-09-05 at 4.19.38 PM.png" width="562" height="435"><br></div><div><br></div><div>Because I use a GPS PPS with vlfrx-tools, it measures absolute phase as seen in the sub plots.</div><div><br></div><div>Jonathan</div><div>KC3EEY</div></div><div dir="auto"><br></div><div dir="auto"><br></div><div>
<br>
> On Sep 6, 2022, at 1:34 PM, Bob Stricklin via TangerineSDR <<a href="mailto:tangerinesdr@lists.tapr.org" target="_blank">tangerinesdr@lists.tapr.org</a>> wrote:<br>
> <br>
> Hello Jonathan,<br>
> <br>
> Thanks for posting your information and the plot.<br>
> <br>
> I have been trying to get a “Super SID” receiver running properly recently. I am using the super SID receiver sold by SARA and a loop antenna. I am not convinced the system is working properly yet.<br>
> Running a python supersid software package on a RPi3. Data is being collected and I can generate plots of signal strength vs time for VLF spectrum (0-48k). I started out trying to monitor about 10 stations and seems to be flowing fine.<br>
> I now feel like my loop antenna needs to be improved with a matching network and I have reverse engineered the circuit on the frontend feeding an audio injector 48K sound card added to the pi. I can see potential improvements in the circuit filter also.<br>
> <br>
> I have some questions about your setup here and the data output…<br>
> <br>
> What VLF receiver is connected to the RPi4 and what type of antenna is being used?<br>
> <br>
> What kind of sound card interface?<br>
> <br>
> What kind of antenna?<br>
> <br>
> In your plot do you feel most of the information is signals or is there a large contribution from noise?<br>
> <br>
> Can you give me an idea what the base level of signal strength is in db/hz or some other units from the receiver?  My system indicates a level of -27 to -32 db/hz although, I have no confidence in this level until I do some calibration testing and I don’t want to stop collecting data to do it.<br>
> <br>
> Also would be interesting to know what three stations your are receiving which are the strongest?<br>
> <br>
> Do you (we) really need to monitor all stations to meet the science goals? If not what would be appropriate? If you do not have any idea that is fine but it is a thought I have had as I go through the process of adding every station available on the list of transmitters.<br>
> <br>
> Bob N5BRG<br>
> <br>
> <br>
> <br>
> <br>
> <br>
>> On Sep 6, 2022, at 10:32 AM, <a href="mailto:tangerinesdr-request@lists.tapr.org" target="_blank">tangerinesdr-request@lists.tapr.org</a> wrote:<br>
>> <br>
>> Send TangerineSDR mailing list submissions to<br>
>>    <a href="mailto:tangerinesdr@lists.tapr.org" target="_blank">tangerinesdr@lists.tapr.org</a><br>
>> <br>
>> To subscribe or unsubscribe via the World Wide Web, visit<br>
>>    <a href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org" rel="noreferrer" target="_blank">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a><br>
>> or, via email, send a message with subject or body 'help' to<br>
>>    <a href="mailto:tangerinesdr-request@lists.tapr.org" target="_blank">tangerinesdr-request@lists.tapr.org</a><br>
>> <br>
>> You can reach the person managing the list at<br>
>>    <a href="mailto:tangerinesdr-owner@lists.tapr.org" target="_blank">tangerinesdr-owner@lists.tapr.org</a><br>
>> <br>
>> When replying, please edit your Subject line so it is more specific<br>
>> than "Re: Contents of TangerineSDR digest..."<br>
>> <br>
>> <br>
>> Today's Topics:<br>
>> <br>
>>  1. Compressed Spectrogram of VLF Spectrum (Jonathan)<br>
>> <br>
>> <br>
>> ----------------------------------------------------------------------<br>
>> <br>
>> Message: 1<br>
>> Date: Tue, 6 Sep 2022 11:31:35 -0400<br>
>> From: Jonathan <<a href="mailto:emuman100@gmail.com" target="_blank">emuman100@gmail.com</a>><br>
>> To: Unknown <<a href="mailto:hamsci@googlegroups.com" target="_blank">hamsci@googlegroups.com</a>>,  TangerineSDR Listserv<br>
>>    <<a href="mailto:tangerinesdr@lists.tapr.org" target="_blank">tangerinesdr@lists.tapr.org</a>><br>
>> Subject: [TangerineSDR] Compressed Spectrogram of VLF Spectrum<br>
>> Message-ID:<br>
>>    <<a href="mailto:CAOY0kB24f-ks7n8kWZAGPmtNGiuRQQTaXkK-bUEt7aPTa9THiQ@mail.gmail.com" target="_blank">CAOY0kB24f-ks7n8kWZAGPmtNGiuRQQTaXkK-bUEt7aPTa9THiQ@mail.gmail.com</a>><br>
>> Content-Type: text/plain; charset="utf-8"<br>
>> <br>
>> Hi All,<br>
>> <br>
>> Nathaniel was kind enough to let me use one of his older computers as a<br>
>> signal processing server and NAS for the recorded VLF signal from our VLF<br>
>> receiver and Raspberry Pi. I set it up to forward the timestamped 96k<br>
>> stream to the server via a network socket, just like the Whistler Catcher<br>
>> VLF module will do with the Tangerine SDR. I wrote a bash script to<br>
>> automate everything and it currently works as a systemd service for<br>
>> automatic startup. Here are a list of the programs running on the server:<br>
>> <br>
>> PID RT %CPU %MEM COMMAND<br>
>> 15871  -  1.6  0.0 vtcat -B -L /data/log/vtcat_in.log ++9000 @timed,f4<br>
>> 15875  -  2.5  0.2 vtfilter -B -a th=5 @timed:1 @filtered<br>
>> 15879  -  9.9  0.2 vtresample -B -r192000 @timed:1 @timed192k<br>
>> 15884  -  0.7  0.0 vtcat -B @timed:1 -- -,f4<br>
>> 15886  -  0.2  0.0 vtwrite -B -L /data/log/vtwrite_96k.log -G 3600<br>
>> /data/vlf_96k<br>
>> 15890  -  4.2  0.0 vtresample -B -r32000 @filtered:1<br>
>> 15892  -  1.7  0.1 vtevent -B -d /data/events<br>
>> 15895  - 15.3  0.1 vtsid -B -c /home/user/sid.conf @timed:1<br>
>> 15898  -  3.1  0.2 vtsid -B -c /home/user/sid_resample192k.conf<br>
>> @timed192k:1<br>
>> 15901  -  2.2  0.1 vttoga -B -G 300 -i 25 -F 6000,16000 -d /data/togas<br>
>> @filtered<br>
>> <br>
>> As you can see, the SID monitor, vtsid, uses quite a bit of the CPU<br>
>> resources, but it's monitoring 17 frequencies for VLF transmitters as well<br>
>> as the mains fundamental, mains 3rd harmonic, the sferic band, and<br>
>> time-decimated spectrum data up to 16 kHz. I run a second instance of vtsid<br>
>> to monitor NAA. Due to the nyquist boundary being a multiple of 24 NAA's<br>
>> kHz, I need to resample the stream at a higher frequency to get proper<br>
>> absolute phase measurements.<br>
>> <br>
>> One of the really cool features of vtsid is that it can record<br>
>> time-decimated spectrum data along with amplitude and phase measurements of<br>
>> various signals. With this data, you can create a compressed spectrogram<br>
>> showing long durations of a day or more. Here is a compressed spectrogram<br>
>> of yesterday's UT day showing the daily sferic activity and the nighttime<br>
>> effect of the earth-ionosphere waveguide cutoff:<br>
>> <br>
>> [image: Screen Shot 2022-09-05 at 9.41.38 PM.png]<br>
>> <br>
>> I cannot tell you how unbelievably cool this visualization is!<br>
>> <br>
>> Jonathan<br>
>> KC3EEY<br>
>> -------------- next part --------------<br>
>> An HTML attachment was scrubbed...<br>
>> URL: <<a href="http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20220906/fb9e0cc4/attachment.html" rel="noreferrer" target="_blank">http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20220906/fb9e0cc4/attachment.html</a>><br>
>> -------------- next part --------------<br>
>> A non-text attachment was scrubbed...<br>
>> Name: Screen Shot 2022-09-05 at 9.41.38 PM.png<br>
>> Type: image/png<br>
>> Size: 286682 bytes<br>
>> Desc: not available<br>
>> URL: <<a href="http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20220906/fb9e0cc4/attachment.png" rel="noreferrer" target="_blank">http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20220906/fb9e0cc4/attachment.png</a>><br>
>> <br>
>> ------------------------------<br>
>> <br>
>> Subject: Digest Footer<br>
>> <br>
>> TangerineSDR mailing list<br>
>> <a href="mailto:TangerineSDR@lists.tapr.org" target="_blank">TangerineSDR@lists.tapr.org</a><br>
>> <a href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org" rel="noreferrer" target="_blank">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a><br>
>> <br>
>> <br>
>> ------------------------------<br>
>> <br>
>> End of TangerineSDR Digest, Vol 42, Issue 3<br>
>> *******************************************<br>
> <br>
> -- <br>
> TangerineSDR mailing list<br>
> <a href="mailto:TangerineSDR@lists.tapr.org" target="_blank">TangerineSDR@lists.tapr.org</a><br>
> <a href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org" rel="noreferrer" target="_blank">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a><br>
</div>