<div dir="ltr">As some of you know, I am working on a local net Setup, Configuration, and Monitoring tool for RM3100 - based magnetometers.<div><br></div><div>At this point the tool is designed to give users visibility and control over their personal magnetometer(s).  </div><div><br></div><div>As currently conceived, there are several things that it does and does not do:</div><div><br></div><div><b>It does:</b></div><ul><li>Provide the owner of the magnetometer a check of its status.</li><li>Show activity measured over some recent period.</li><li>Allow setup of metadata.</li><li>Allow configuration and testing of new magnetometer setups.</li><li>Require update of the runMag/multiMag utility to allow it to communicate via named pipes.</li><li>Require installation of other software (probably in Python) to create interprocess and Web socket communication links.</li></ul><div><br></div><div><b>It may (later):</b></div><div><ul><li>Allow real time modification of operating parameters.</li><li>Allow comparison with INTERMAG or other other data within the local interface.</li><li>Allow projection of secured data to remote viewers and cell phones off the local net. (low priority)</li></ul></div><div><br></div><div><b>It is not:</b></div><div><ul><li>It is not an analysis tool <i>per se</i>.</li><li>It is not meant to give visibility of real-time activity to users off the  local subnet.</li><li>It does not interfere in publishing bulk data to the cloud repository.</li><li>It is not directly integrated with the larger effort by HamSCI and TangerineSDR to capture magnetometer instrument data into the Alabama repository, though it could find a place there somewhere.</li></ul></div></div>