<div dir="ltr">Hi Jonathan,<br><div><br></div><div>  I looked at the documentation (HTML page) but I cannot find a precise definition of the stream format.  Where is that located or could you summarize that?  It would then be possible for those of us familiar with DigitalRF, and in particular the Haystack team who maintains it, to examine the ways in which a .vt file could be translated to DigitalRF or the other way around.</div><div><br></div><div>73</div><div>Phil W1PJE</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Mar 10, 2021 at 10:46 PM Jonathan via TangerineSDR <<a href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex">Hi Tom,<br>
<br>
Thank you for looking at the documentation for vlfrx-tools! I'll list some <br>
useful utilities included in vlfrx-tools to try to illustrate how useful <br>
they can be. A utility can be written to convert to DigitalRF/HDF5, <br>
however, vlfrx-tools does not normally generate IQ data.<br>
<br>
For others on the list, the vlfrx-tools documentation is <br>
available at <a href="http://abelian.org/vlfrx-tools/" rel="noreferrer" target="_blank">http://abelian.org/vlfrx-tools/</a> and this also includes the <br>
source code. Also, for the others on the list, I'd like to make the <br>
argument that vlfrx-tools is advantageous because of its useful toolset in <br>
analysis and post-processing of both natural radio, amateur radio in the <br>
VLF band, and VLF transmitters. Such tools don't exist (to my knowledge) <br>
for formats like DigitalRF. Since vlfrx-tools is such a diverse and <br>
usefull toolset that already exists, it's advantageous to utilize it in <br>
post-processing on the PSWS database to make available SID events, <br>
whistler and chorus events, and lightning location data, just to name a <br>
few.<br>
<br>
vtblank - an impulsive noise blanker that removes sferics and other <br>
impulsive noise from the VLF spectrum. It's useful in studying VLF <br>
transmitters and especially useful for VLF QSOs.<br>
<br>
vtam - used to extract the magnitude of a non-stationary signal like a <br>
sferic. You can examine the timing of sferics, whistlers, and the edges of <br>
timing signals like WWVB.<br>
<br>
vtpolar - generate a polar plot movie of a triple axis VLF stream. This <br>
allows you to see the bearing of incoming VLF signals like whistlers. <br>
Please watch the movie in the documentation!<br>
<br>
vtsid - automatically  detects sudden ionospheric disturbances with VLF <br>
transmitters like NAA. It generates a plot and a data file. The extraction <br>
utility can extract records from that data file.<br>
<br>
vtevent - automatically detects whistlers and chorus and generates a <br>
spectrogram plot, data file, and audio file of the event.<br>
<br>
vttoga - creates time of group arrival data from sferics the incoming VLF <br>
stream or a file.<br>
<br>
vtspot - used to generate lightning location data from vttoga data from <br>
VLF receivers around the world. The PSWS database can provide lightning <br>
location data using a network of receivers.<br>
<br>
vtping - used to detect meteor ping.<br>
<br>
vtwrite - writes a VLF stream, either from a ring buffer or network <br>
socket, to file for storage.<br>
<br>
vtread - reads a .vt file into a ring buffer or network socket.<br>
<br>
vtraw - extract raw audio froma VLF stream. This also removes the <br>
timestamping.<br>
<br>
vtwavex - extract a wav file from a VLF stream. This also removes the <br>
timestamping.<br>
<br>
These are just some examples of useful utilities of vlfrx-tools. A utility <br>
to convert a .vt file to DigitalRF/HDF5 can be written (however, I cannot <br>
support that). Also, vlfrx-tools does not generate IQ data normally. But, <br>
with such a toolset, so much can done. I would hope this convinces some of <br>
those who may be skeptical. In any case, I urge you to look at the <br>
documentation.<br>
<br>
Jonathan<br>
KC3EEY<br>
<br>
On Wed, 10 Mar 2021, Tom McDermott via TangerineSDR wrote:<br>
<br>
> Date: Wed, 10 Mar 2021 12:07:26 -0800<br>
> From: Tom McDermott via TangerineSDR <<a href="mailto:tangerinesdr@lists.tapr.org" target="_blank">tangerinesdr@lists.tapr.org</a>><br>
> To: TAPR TangerineSDR Modular Software Defined Radio<br>
>     <<a href="mailto:tangerinesdr@lists.tapr.org" target="_blank">tangerinesdr@lists.tapr.org</a>><br>
> Cc: Tom McDermott <<a href="mailto:tom.n5eg@gmail.com" target="_blank">tom.n5eg@gmail.com</a>><br>
> Subject: [TangerineSDR] VLF-RX tools<br>
> <br>
> Hi,  I don't have Jonathan Rizzo's direct email, so sending this to the<br>
> list.<br>
><br>
> We talked a bit about the VLF receiver on the last conference call, and the<br>
> VLFRX tools.<br>
> I'd like to email with Jonathan directly.   It appears those tools have the<br>
> ability to<br>
> read from a file (and thus in Linux from a named pipe).  Gnuradio can write<br>
> to a named pipe<br>
> as well to DigitalRF (HDF5).   Perhaps this may provide a mechanism to<br>
> hook the receiver both to the Tangerine archiving method as well as to<br>
> VLFRX.?<br>
><br>
> -- Tom, N5EG<br>
> <a href="mailto:n5eg@tapr.org" target="_blank">n5eg@tapr.org</a><br>
><br>
<br>
-- <br>
TangerineSDR mailing list<br>
<a href="mailto:TangerineSDR@lists.tapr.org" target="_blank">TangerineSDR@lists.tapr.org</a><br>
<a href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org" rel="noreferrer" target="_blank">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a><br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature">----<br>Phil Erickson<br><a href="mailto:phil.erickson@gmail.com" target="_blank">phil.erickson@gmail.com</a><br></div>