<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
  </head>
  <body>
    <font face="Arial">Regarding the en pin of the 9615, Spark Fun's
      board just lets this float ... line goes to an EN pad on the edge
      connector.  Internal 300Kohm pullup on EN pin in the 9615.  In
      hundreds of power up cycles, I've never seen a problem with the
      SparkFun board.  Could be enough stray capacitance to satisfy the
      delay requirement.  <br>
      <br>
      Also, the data sheet discusses the 11ms in the context of both hot
      swap and power on.  In hot swap, most of that time is for debounce
      which is not the case in power on so it's somewhat confusing.  <br>
      <br>
      Dave's 0.0.10 2020-02-03 board has a 0.1uf cap to ground on the EN
      pin with a diode to the VddA pin to discharge the cap on power off
      to insure proper sequencing re the data sheet requirements. The
      0.1uf cap gives an RC time constant of 30ms.<br>
      Jules-K2KGJ<br>
    </font><br>
    <div class="moz-cite-prefix">On 8/7/2020 9:00 AM,
      <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr-request@lists.tapr.org">tangerinesdr-request@lists.tapr.org</a> wrote:<br>
    </div>
    <blockquote type="cite"
cite="mid:mailman.4304.1596805248.14912.tangerinesdr_lists.tapr.org@lists.tapr.org">
      <pre class="moz-quote-pre" wrap="">Send TangerineSDR mailing list submissions to
        <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a>

To subscribe or unsubscribe via the World Wide Web, visit
        <a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>
or, via email, send a message with subject or body 'help' to
        <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr-request@lists.tapr.org">tangerinesdr-request@lists.tapr.org</a>

You can reach the person managing the list at
        <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr-owner@lists.tapr.org">tangerinesdr-owner@lists.tapr.org</a>

When replying, please edit your Subject line so it is more specific
than "Re: Contents of TangerineSDR digest..."


Today's Topics:

   1. Re: Tangerine SDR uploading to PSK Reporter is working
      (Dr. Nathaniel A. Frissell Ph.D.)
   2. Re: MagnetoPi Hat schematic posted to TangerineSDR Documents
      folder (Tom McDermott)


----------------------------------------------------------------------

Message: 1
Date: Thu, 6 Aug 2020 18:52:02 +0000
From: "Dr. Nathaniel A. Frissell Ph.D."
        <a class="moz-txt-link-rfc2396E" href="mailto:nathaniel.frissell@scranton.edu"><nathaniel.frissell@scranton.edu></a>
To: TAPR TangerineSDR Modular Software Defined Radio
        <a class="moz-txt-link-rfc2396E" href="mailto:tangerinesdr@lists.tapr.org"><tangerinesdr@lists.tapr.org></a>
Cc: Gerry Creager - NOAA Affiliate <a class="moz-txt-link-rfc2396E" href="mailto:gerry.creager@noaa.gov"><gerry.creager@noaa.gov></a>, "Engelke,
        Bill" <a class="moz-txt-link-rfc2396E" href="mailto:bill.engelke@ua.edu"><bill.engelke@ua.edu></a>
Subject: Re: [TangerineSDR] Tangerine SDR uploading to PSK Reporter is
        working
Message-ID:
        <a class="moz-txt-link-rfc2396E" href="mailto:MN2PR03MB5166F4D306EC4CD3E4D60BA6F2480@MN2PR03MB5166.namprd03.prod.outlook.com"><MN2PR03MB5166F4D306EC4CD3E4D60BA6F2480@MN2PR03MB5166.namprd03.prod.outlook.com></a>
        
Content-Type: text/plain; charset="utf-8"

That?s awesome!

73 de Nathaniel

From: TangerineSDR <a class="moz-txt-link-rfc2396E" href="mailto:tangerinesdr-bounces@lists.tapr.org"><tangerinesdr-bounces@lists.tapr.org></a> On Behalf Of Gerry Creager - NOAA Affiliate via TangerineSDR
Sent: Wednesday, August 5, 2020 4:35 PM
To: TAPR TangerineSDR Modular Software Defined Radio <a class="moz-txt-link-rfc2396E" href="mailto:tangerinesdr@lists.tapr.org"><tangerinesdr@lists.tapr.org></a>
Cc: Gerry Creager - NOAA Affiliate <a class="moz-txt-link-rfc2396E" href="mailto:gerry.creager@noaa.gov"><gerry.creager@noaa.gov></a>; Engelke, Bill <a class="moz-txt-link-rfc2396E" href="mailto:bill.engelke@ua.edu"><bill.engelke@ua.edu></a>
Subject: Re: [TangerineSDR] Tangerine SDR uploading to PSK Reporter is working

Woot!

Gerry N5JXS

On Wed, Aug 5, 2020 at 15:33 Bill Liles via TangerineSDR <<a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a><a class="moz-txt-link-rfc2396E" href="mailto:tangerinesdr@lists.tapr.org"><mailto:tangerinesdr@lists.tapr.org></a>> wrote:

Congratulations.  Nice.
Bill, NQ6Z

On Wed, Aug 5, 2020 at 4:06 PM Aidan Montare via TangerineSDR <<a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a><a class="moz-txt-link-rfc2396E" href="mailto:tangerinesdr@lists.tapr.org"><mailto:tangerinesdr@lists.tapr.org></a>> wrote:
Very nice!
?
Aidan Montare


On Aug 5, 2020, at 3:43 PM, Engelke, Bill via TangerineSDR <<a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a><a class="moz-txt-link-rfc2396E" href="mailto:tangerinesdr@lists.tapr.org"><mailto:tangerinesdr@lists.tapr.org></a>> wrote:
?
Gotta tell somebody about this.  Using IQ data from FlexRadio and the TangerineSDR simulator and local host,  I can now send spots to PSK Reporter.

<image001.png>

-73- Bill, AB4EJ

PS. I know your question now, is ?what about WSPR??  -  arrrgh, I?ll get to it eventually
--
TangerineSDR mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TangerineSDR@lists.tapr.org">TangerineSDR@lists.tapr.org</a><a class="moz-txt-link-rfc2396E" href="mailto:TangerineSDR@lists.tapr.org"><mailto:TangerineSDR@lists.tapr.org></a>
<a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>
--
TangerineSDR mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TangerineSDR@lists.tapr.org">TangerineSDR@lists.tapr.org</a><a class="moz-txt-link-rfc2396E" href="mailto:TangerineSDR@lists.tapr.org"><mailto:TangerineSDR@lists.tapr.org></a>
<a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>
--
TangerineSDR mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TangerineSDR@lists.tapr.org">TangerineSDR@lists.tapr.org</a><a class="moz-txt-link-rfc2396E" href="mailto:TangerineSDR@lists.tapr.org"><mailto:TangerineSDR@lists.tapr.org></a>
<a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>
--
Gerry Creager
NSSL/CIMMS
(C) 979.229.5301 <--- NOTE THAT MY OFFICE NUMBER HAS CHANGED
++++++++++++++++++++++
The way to get started is to quit talking and begin doing.
   Walt Disney
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <a class="moz-txt-link-rfc2396E" href="http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200806/bd0ef2af/attachment-0001.html"><http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200806/bd0ef2af/attachment-0001.html></a>

------------------------------

Message: 2
Date: Fri, 7 Aug 2020 05:59:28 -0700
From: Tom McDermott <a class="moz-txt-link-rfc2396E" href="mailto:tom.n5eg@gmail.com"><tom.n5eg@gmail.com></a>
To: TAPR TangerineSDR Modular Software Defined Radio
        <a class="moz-txt-link-rfc2396E" href="mailto:tangerinesdr@lists.tapr.org"><tangerinesdr@lists.tapr.org></a>
Subject: Re: [TangerineSDR] MagnetoPi Hat schematic posted to
        TangerineSDR Documents folder
Message-ID:
        <a class="moz-txt-link-rfc2396E" href="mailto:CACO3nRT0G1PCao+KpVO9mFScPd=pq-jgHrqAMbkwQA7XAZpHiQ@mail.gmail.com"><CACO3nRT0G1PCao+KpVO9mFScPd=pq-jgHrqAMbkwQA7XAZpHiQ@mail.gmail.com></a>
Content-Type: text/plain; charset="utf-8"

Hi Scotty - I find the schematic difficult to understand because there are
so many placeholders for things that are not implemented, but might be
implemented in the future.
Without knowing what the future is, why the further things are the way they
are, what the various connectors might or might not do, it is nigh
impossible to know what is done and why.

So, ignoring all that, here are comments:

1. AVDD and DVDD are tied together on the PNI sensor board. Do these need
to be separately decoupled?  Will noise on
the DVDD mess up the AVDD signal?

2. I'm confused about Pin 6 (GND) of the RPI connector, pullup R10 and
strap JMP4.
The notes on the schematic aren't enough for me to sort all this out and
what is going on here.
Maybe a table would help.

3. Dave had an initial problem with the I2C differential driver/receiver
where there was an RC delay needed. Assuming you are
using the same component, I think this may have this problem.  U7, pin 2
should not be tied to VCC but to an RC delay network.

Here is my comment to Dave on January 27th:
</pre>
      <blockquote type="cite">
        <pre class="moz-quote-pre" wrap="">The power supplies need to sequence up cleanly for the internal
</pre>
      </blockquote>
      <pre class="moz-quote-pre" wrap="">Power-on-Reset of the extender chip to initialize
</pre>
      <blockquote type="cite">
        <pre class="moz-quote-pre" wrap="">properly.  The EN pin must be low during power stabilization then
</pre>
      </blockquote>
      <pre class="moz-quote-pre" wrap="">transition to high more than 11 milliseconds after power is applied.
</pre>
      <blockquote type="cite">
        <pre class="moz-quote-pre" wrap="">The datasheet says that it is not allowed to transition high sooner than
</pre>
      </blockquote>
      <pre class="moz-quote-pre" wrap="">11 ms after application of power. [Figure 6 of
</pre>
      <blockquote type="cite">
        <pre class="moz-quote-pre" wrap="">the datasheet, section 7.4]. Since you have it hard-wired to +3.3V, I
</pre>
      </blockquote>
      <pre class="moz-quote-pre" wrap="">suspect this could be one problem. If you do
</pre>
      <blockquote type="cite">
        <pre class="moz-quote-pre" wrap="">not have logic tied to this pin, then an RC delay circuit may be needed.
</pre>
      </blockquote>
      <pre class="moz-quote-pre" wrap="">I'd look at the Sparkfun circuit and see
</pre>
      <blockquote type="cite">
        <pre class="moz-quote-pre" wrap="">how they do it.
</pre>
      </blockquote>
      <pre class="moz-quote-pre" wrap="">
My recollection is Sparkfun did it wrong also...   When Dave fixed this it
started working.

-- Tom, N5EG




On Tue, Aug 4, 2020 at 3:10 PM Scott Cowling via TangerineSDR <
<a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a>> wrote:

</pre>
      <blockquote type="cite">
        <pre class="moz-quote-pre" wrap="">The final schematic of the Raspberry Pi Magnetometer Hat board is up in
the TangerineSDR documents folder.

Before we pull the trigger on a proto build please take a minute to
review it and comment.

This board is complete including layout and BOM, so hold any changes in
functionality for rev 2. We just need to make sure there are no errors.

Several of you have seen this before and commented. I tried to include
all of your suggestions in this final version.

So let's see how I did! :-)

Here is the link:

</pre>
        <blockquote type="cite">
          <pre class="moz-quote-pre" wrap="">
</pre>
        </blockquote>
        <pre class="moz-quote-pre" wrap=""><a class="moz-txt-link-freetext" href="https://tangerinesdr.com/TangerineSDR_documents/MAGNETOPIHAT_SCHEMATIC_XA9.pdf">https://tangerinesdr.com/TangerineSDR_documents/MAGNETOPIHAT_SCHEMATIC_XA9.pdf</a>



73,
Scotty WA2DFI



--
TangerineSDR mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TangerineSDR@lists.tapr.org">TangerineSDR@lists.tapr.org</a>
<a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>

</pre>
      </blockquote>
      <pre class="moz-quote-pre" wrap="">-------------- next part --------------
An HTML attachment was scrubbed...
URL: <a class="moz-txt-link-rfc2396E" href="http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200807/5b5d3c88/attachment.html"><http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200807/5b5d3c88/attachment.html></a>

------------------------------

Subject: Digest Footer

TangerineSDR mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TangerineSDR@lists.tapr.org">TangerineSDR@lists.tapr.org</a>
<a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>


------------------------------

End of TangerineSDR Digest, Vol 17, Issue 15
********************************************

</pre>
    </blockquote>
    <br>
  </body>
</html>