<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
  </head>
  <body>
    <font face="Arial">Dave,<br>
      Very nice set of options.  <br>
      I tried changing the cycle count to 400, but the gain correction
      didn't change to follow that. I can use the raw data and apply the
      correct gain value, however the processed values are only accurate
      at the default cycle count of 200.<br>
      <br>
      Only other features I can think of at this point are: <br>
      (1) perhaps limiting cycle count choices to 200, 300, 400  with
      appropriate gain correction for each<br>
      (2) displaying 2 decimal points of resolution on the processed
      values which provides 10's of nanoTeslas resolution ... more or
      less on the order of the hoped for resolution of this magnetometer<br>
      (3) setting the NOS register for 'on board' averaging<br>
      <br>
      Regards,<br>
      Jules - K2KGJ<br>
    </font><br>
    <div class="moz-cite-prefix">On 5/18/2020 10:38 PM,
      <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr-request@lists.tapr.org">tangerinesdr-request@lists.tapr.org</a> wrote:<br>
    </div>
    <blockquote type="cite"
cite="mid:mailman.545.1589855906.985.tangerinesdr_lists.tapr.org@lists.tapr.org">
      <pre class="moz-quote-pre" wrap="">Send TangerineSDR mailing list submissions to
        <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a>

To subscribe or unsubscribe via the World Wide Web, visit
        <a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>
or, via email, send a message with subject or body 'help' to
        <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr-request@lists.tapr.org">tangerinesdr-request@lists.tapr.org</a>

You can reach the person managing the list at
        <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr-owner@lists.tapr.org">tangerinesdr-owner@lists.tapr.org</a>

When replying, please edit your Subject line so it is more specific
than "Re: Contents of TangerineSDR digest..."


Today's Topics:

   1. Re: TangerineSDR Digest, Vol 14, Issue 25 (Julius Madey)
   2. Re: TangerineSDR Digest, Vol 14, Issue 25 (Julius Madey)
   3. Notes from PSWS / TangerineSDR call 05-18-2020 (Tom McDermott)


----------------------------------------------------------------------

Message: 1
Date: Mon, 18 May 2020 13:53:53 -0400
From: Julius Madey <a class="moz-txt-link-rfc2396E" href="mailto:hillfox@fairpoint.net"><hillfox@fairpoint.net></a>
To: <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a>
Subject: Re: [TangerineSDR] TangerineSDR Digest, Vol 14, Issue 25
Message-ID: <a class="moz-txt-link-rfc2396E" href="mailto:8a171afc-fb2a-1806-17ff-20f957918533@fairpoint.net"><8a171afc-fb2a-1806-17ff-20f957918533@fairpoint.net></a>
Content-Type: text/plain; charset="utf-8"; Format="flowed"

Thanks Dave, will try it today and report re my previous results.
Jules? K2KGJ

On 5/18/2020 12:00 PM, <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr-request@lists.tapr.org">tangerinesdr-request@lists.tapr.org</a> wrote:
</pre>
      <blockquote type="cite">
        <pre class="moz-quote-pre" wrap="">Send TangerineSDR mailing list submissions to
        <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a>

To subscribe or unsubscribe via the World Wide Web, visit
        <a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>
or, via email, send a message with subject or body 'help' to
        <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr-request@lists.tapr.org">tangerinesdr-request@lists.tapr.org</a>

You can reach the person managing the list at
        <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr-owner@lists.tapr.org">tangerinesdr-owner@lists.tapr.org</a>

When replying, please edit your Subject line so it is more specific
than "Re: Contents of TangerineSDR digest..."


Today's Topics:

    1. Magnetometer testing software (David Witten)
    2. Re: Magnetometer testing software (Tom McDermott)


----------------------------------------------------------------------

Message: 1
Date: Sun, 17 May 2020 14:26:57 -0500
From: David Witten <a class="moz-txt-link-rfc2396E" href="mailto:wittend@wwrinc.com"><wittend@wwrinc.com></a>
To: <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a>
Subject: [TangerineSDR] Magnetometer testing software
Message-ID:
        <a class="moz-txt-link-rfc2396E" href="mailto:CABJ3BVPAfRQs5xzD72CdzXxQJ+xHa8jc2QYR=niYcZ-U5jvsCA@mail.gmail.com"><CABJ3BVPAfRQs5xzD72CdzXxQJ+xHa8jc2QYR=niYcZ-U5jvsCA@mail.gmail.com></a>
Content-Type: text/plain; charset="utf-8"

To all and any:

I have opened up a github repo for the improved magnetometer testing
softwareat:

<a class="moz-txt-link-freetext" href="https://github.com/wittend/rm3100-runMag">https://github.com/wittend/rm3100-runMag</a>

*Improved* does not mean that it *works*, and certainly any results remain
unverified.  There are probably many egregious errors.  But it is better
than anything that I have provided in the past (I think).  The
documentation is rudimentary or worse, but I'm working on it.

The old repo for the 'simplei2c' program has been withdrawn.  May it RIP.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <a class="moz-txt-link-rfc2396E" href="http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200517/3b7afd3d/attachment-0001.html"><http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200517/3b7afd3d/attachment-0001.html></a>

------------------------------

Message: 2
Date: Sun, 17 May 2020 21:11:50 -0700
From: Tom McDermott <a class="moz-txt-link-rfc2396E" href="mailto:tom.n5eg@gmail.com"><tom.n5eg@gmail.com></a>
To: TAPR TangerineSDR Modular Software Defined Radio
        <a class="moz-txt-link-rfc2396E" href="mailto:tangerinesdr@lists.tapr.org"><tangerinesdr@lists.tapr.org></a>
Cc: David Witten <a class="moz-txt-link-rfc2396E" href="mailto:wittend@wwrinc.com"><wittend@wwrinc.com></a>
Subject: Re: [TangerineSDR] Magnetometer testing software
Message-ID:
        <a class="moz-txt-link-rfc2396E" href="mailto:CACO3nRSFrR3qx5f5n8qczV2xqTzyX_2HVoEwJHy604u0_zi7MQ@mail.gmail.com"><CACO3nRSFrR3qx5f5n8qczV2xqTzyX_2HVoEwJHy604u0_zi7MQ@mail.gmail.com></a>
Content-Type: text/plain; charset="utf-8"

Hi Dave,  thanks for putting this up on github !
It clones and builds with no problems.

-- Tom, N5EG




On Sun, May 17, 2020 at 12:27 PM David Witten via TangerineSDR <
<a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a>> wrote:

</pre>
        <blockquote type="cite">
          <pre class="moz-quote-pre" wrap="">To all and any:

I have opened up a github repo for the improved magnetometer testing
softwareat:

<a class="moz-txt-link-freetext" href="https://github.com/wittend/rm3100-runMag">https://github.com/wittend/rm3100-runMag</a>

*Improved* does not mean that it *works*, and certainly any results
remain unverified.  There are probably many egregious errors.  But it is
better than anything that I have provided in the past (I think).  The
documentation is rudimentary or worse, but I'm working on it.

The old repo for the 'simplei2c' program has been withdrawn.  May it RIP.



--
TangerineSDR mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TangerineSDR@lists.tapr.org">TangerineSDR@lists.tapr.org</a>
<a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>

</pre>
        </blockquote>
        <pre class="moz-quote-pre" wrap="">-------------- next part --------------
An HTML attachment was scrubbed...
URL: <a class="moz-txt-link-rfc2396E" href="http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200517/e0301107/attachment-0001.html"><http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200517/e0301107/attachment-0001.html></a>

------------------------------

Subject: Digest Footer

TangerineSDR mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TangerineSDR@lists.tapr.org">TangerineSDR@lists.tapr.org</a>
<a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>


------------------------------

End of TangerineSDR Digest, Vol 14, Issue 25
********************************************

</pre>
      </blockquote>
      <pre class="moz-quote-pre" wrap="">
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <a class="moz-txt-link-rfc2396E" href="http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200518/1e2c64a9/attachment-0001.html"><http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200518/1e2c64a9/attachment-0001.html></a>

------------------------------

Message: 2
Date: Mon, 18 May 2020 20:37:07 -0400
From: Julius Madey <a class="moz-txt-link-rfc2396E" href="mailto:hillfox@fairpoint.net"><hillfox@fairpoint.net></a>
To: <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a>
Subject: Re: [TangerineSDR] TangerineSDR Digest, Vol 14, Issue 25
Message-ID: <a class="moz-txt-link-rfc2396E" href="mailto:d97afc2c-94b4-dd9b-2cc8-9a6b29cfcc4d@fairpoint.net"><d97afc2c-94b4-dd9b-2cc8-9a6b29cfcc4d@fairpoint.net></a>
Content-Type: text/plain; charset="utf-8"; Format="flowed"

Dave,
After correcting a minor issue in the function 'read temp' in main.c 
where you inadvertently left out the comment // before the word 'works', 
it compiled nicely and runs fine.

I note that the gain corrected readout is in integer microteslas. When I 
patched your original code to include gain, I also used microteslas with 
3 decimal places to the right; with a cycle count of 200 (gain 75) it's 
actually closer to 2 decimal places (+/- 10nT) but the three places is 
handy for noise level evaluation for higher cycle counts and averaging.

Could, of course, work directly with the raw values but I find it easier 
to think of the noise / resolution issue in terms of nanoTeslas directly.

Your gain corrected values match the expected field levels in my 
location from geomag models and are identical to the readings I obtained 
with my patches to your original test code.

Thanks for all the effort !

Jules -K2KGJ


On 5/18/2020 12:00 PM, <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr-request@lists.tapr.org">tangerinesdr-request@lists.tapr.org</a> wrote:
</pre>
      <blockquote type="cite">
        <pre class="moz-quote-pre" wrap="">Send TangerineSDR mailing list submissions to
        <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a>

To subscribe or unsubscribe via the World Wide Web, visit
        <a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>
or, via email, send a message with subject or body 'help' to
        <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr-request@lists.tapr.org">tangerinesdr-request@lists.tapr.org</a>

You can reach the person managing the list at
        <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr-owner@lists.tapr.org">tangerinesdr-owner@lists.tapr.org</a>

When replying, please edit your Subject line so it is more specific
than "Re: Contents of TangerineSDR digest..."


Today's Topics:

    1. Magnetometer testing software (David Witten)
    2. Re: Magnetometer testing software (Tom McDermott)


----------------------------------------------------------------------

Message: 1
Date: Sun, 17 May 2020 14:26:57 -0500
From: David Witten <a class="moz-txt-link-rfc2396E" href="mailto:wittend@wwrinc.com"><wittend@wwrinc.com></a>
To: <a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a>
Subject: [TangerineSDR] Magnetometer testing software
Message-ID:
        <a class="moz-txt-link-rfc2396E" href="mailto:CABJ3BVPAfRQs5xzD72CdzXxQJ+xHa8jc2QYR=niYcZ-U5jvsCA@mail.gmail.com"><CABJ3BVPAfRQs5xzD72CdzXxQJ+xHa8jc2QYR=niYcZ-U5jvsCA@mail.gmail.com></a>
Content-Type: text/plain; charset="utf-8"

To all and any:

I have opened up a github repo for the improved magnetometer testing
softwareat:

<a class="moz-txt-link-freetext" href="https://github.com/wittend/rm3100-runMag">https://github.com/wittend/rm3100-runMag</a>

*Improved* does not mean that it *works*, and certainly any results remain
unverified.  There are probably many egregious errors.  But it is better
than anything that I have provided in the past (I think).  The
documentation is rudimentary or worse, but I'm working on it.

The old repo for the 'simplei2c' program has been withdrawn.  May it RIP.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <a class="moz-txt-link-rfc2396E" href="http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200517/3b7afd3d/attachment-0001.html"><http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200517/3b7afd3d/attachment-0001.html></a>

------------------------------

Message: 2
Date: Sun, 17 May 2020 21:11:50 -0700
From: Tom McDermott <a class="moz-txt-link-rfc2396E" href="mailto:tom.n5eg@gmail.com"><tom.n5eg@gmail.com></a>
To: TAPR TangerineSDR Modular Software Defined Radio
        <a class="moz-txt-link-rfc2396E" href="mailto:tangerinesdr@lists.tapr.org"><tangerinesdr@lists.tapr.org></a>
Cc: David Witten <a class="moz-txt-link-rfc2396E" href="mailto:wittend@wwrinc.com"><wittend@wwrinc.com></a>
Subject: Re: [TangerineSDR] Magnetometer testing software
Message-ID:
        <a class="moz-txt-link-rfc2396E" href="mailto:CACO3nRSFrR3qx5f5n8qczV2xqTzyX_2HVoEwJHy604u0_zi7MQ@mail.gmail.com"><CACO3nRSFrR3qx5f5n8qczV2xqTzyX_2HVoEwJHy604u0_zi7MQ@mail.gmail.com></a>
Content-Type: text/plain; charset="utf-8"

Hi Dave,  thanks for putting this up on github !
It clones and builds with no problems.

-- Tom, N5EG




On Sun, May 17, 2020 at 12:27 PM David Witten via TangerineSDR <
<a class="moz-txt-link-abbreviated" href="mailto:tangerinesdr@lists.tapr.org">tangerinesdr@lists.tapr.org</a>> wrote:

</pre>
        <blockquote type="cite">
          <pre class="moz-quote-pre" wrap="">To all and any:

I have opened up a github repo for the improved magnetometer testing
softwareat:

<a class="moz-txt-link-freetext" href="https://github.com/wittend/rm3100-runMag">https://github.com/wittend/rm3100-runMag</a>

*Improved* does not mean that it *works*, and certainly any results
remain unverified.  There are probably many egregious errors.  But it is
better than anything that I have provided in the past (I think).  The
documentation is rudimentary or worse, but I'm working on it.

The old repo for the 'simplei2c' program has been withdrawn.  May it RIP.



--
TangerineSDR mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TangerineSDR@lists.tapr.org">TangerineSDR@lists.tapr.org</a>
<a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>

</pre>
        </blockquote>
        <pre class="moz-quote-pre" wrap="">-------------- next part --------------
An HTML attachment was scrubbed...
URL: <a class="moz-txt-link-rfc2396E" href="http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200517/e0301107/attachment-0001.html"><http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200517/e0301107/attachment-0001.html></a>

------------------------------

Subject: Digest Footer

TangerineSDR mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TangerineSDR@lists.tapr.org">TangerineSDR@lists.tapr.org</a>
<a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>


------------------------------

End of TangerineSDR Digest, Vol 14, Issue 25
********************************************

</pre>
      </blockquote>
      <pre class="moz-quote-pre" wrap="">
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <a class="moz-txt-link-rfc2396E" href="http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200518/4b80ca05/attachment-0001.html"><http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200518/4b80ca05/attachment-0001.html></a>

------------------------------

Message: 3
Date: Mon, 18 May 2020 19:37:08 -0700
From: Tom McDermott <a class="moz-txt-link-rfc2396E" href="mailto:tom.n5eg@gmail.com"><tom.n5eg@gmail.com></a>
To: TAPR TangerineSDR Modular Software Defined Radio
        <a class="moz-txt-link-rfc2396E" href="mailto:tangerinesdr@lists.tapr.org"><tangerinesdr@lists.tapr.org></a>
Subject: [TangerineSDR] Notes from PSWS / TangerineSDR call 05-18-2020
Message-ID:
        <a class="moz-txt-link-rfc2396E" href="mailto:CACO3nRTPuZ=GvW5jOpUqM5k5gCCz3u3KNp4OwD0JKEAkZ6Rx1g@mail.gmail.com"><CACO3nRTPuZ=GvW5jOpUqM5k5gCCz3u3KNp4OwD0JKEAkZ6Rx1g@mail.gmail.com></a>
Content-Type: text/plain; charset="utf-8"

Notes from PSWS / TangerineSDR call of 05-18-2020

1. Elizabeth mentioned that University of Houston is looking at
TangerineSDR for their balloon experiment ground station, rather than the
balloon itself. This is due to size and weight limitations.

2. Discussion on I2C addressing for the magnetometer, both hardware and
software. Different single board computers use different bus interfaces to
talk to the external I2C pins. Changing the I2C bus speed (away from
default) to 100 kb/s currently looks like it may need editing the device
tree (differently) for each SBC type.

3. Scotty asked if the HF receiver could be extended to VLF frequencies
without degrading the HF performance. The VLF requirements (NF,
sensitivity, dynamic range, frequency range, etc.) are not known.  At this
point it seems best to first characterize the performance of the receiver
we have designed at not only HF but also VLF, then see if the VLF
performance is adequate. If not then either design modifications (if
possible while maintaining the HF specs) or a different receiver could be
done.

-- Tom, N5EG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <a class="moz-txt-link-rfc2396E" href="http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200518/3d23e95a/attachment.html"><http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200518/3d23e95a/attachment.html></a>

------------------------------

Subject: Digest Footer

TangerineSDR mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TangerineSDR@lists.tapr.org">TangerineSDR@lists.tapr.org</a>
<a class="moz-txt-link-freetext" href="http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org">http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org</a>


------------------------------

End of TangerineSDR Digest, Vol 14, Issue 26
********************************************

</pre>
    </blockquote>
    <br>
  </body>
</html>