<div dir="ltr"><div dir="ltr"><div><br>Notes from PSWS / TangerineSDR call of 03-09-2020</div><div><br></div><div>1. Tom will update the Interface Control Document (ICD ) for the receiver to add the receiver board outline and connector placement. Also add the placement and dimensions for the plug-on filter boards - existing and constraints on future filter boards.</div><div><br></div><div>2. Scotty's plan for the first prototypes is Data Engine (DE) and Receiver by Hamvention (Dayton) in May.</div><div><br></div><div>3. Decided that it probably best to use a firmware switch to enable/disable programing of the FPGA image on the DE (no hardware switch or jumper). The firmware switch would be set by the user on the Local Host computer.  This is especially useful for remotely updating a number of units. Estimated size of an FPGA image is about 500k bytes.</div><div><br></div><div>-- Tom, N5EG</div><div><br></div><div> </div><div><br></div></div></div>