<div dir="ltr">All: <div><br></div><div>Information about the Odroid N2I2C bus speed can be found here:   <a href="https://wiki.odroid.com/odroid-n2/application_note/gpio/i2c">https://wiki.odroid.com/odroid-n2/application_note/gpio/i2c</a>.</div><div><br></div><div>Using the command "sudo cat /sys/bus/i2c/devices/i2c-2/device/speed" the response is 400000.  It seems that I am currently using the default bus speed for device /dev/i2c-2 which is 400 kHz.  </div><div><br></div><div>The default for bus 3 is only 100 k, but I do not want to use it because the use of the second bus on Pi-like devices is more variable and often requires remapping other features.</div><div><br></div><div>The instructions on this page are not letting me change the setting using sudo from my default account.  But the fact that the extender seems to work consistently at 400 k can only be seen as encouraging.</div><div><br></div><div>I'll look into the Xavier's defaults and measure it's GPIO voltages just to find out what *does* make it misbehave.  Then we will know what to worry about on the DE.</div><div><br></div><div>Dave<br><div><br></div><div><br></div></div></div>