<div dir="ltr"><div dir="ltr"><div><br>Notes from PSWS / TangerineSDR call of 02-03-2020</div><div><br></div><div>1. Discussion of Hamcation (Orlando) conference presentations.</div><div><br></div><div>2. Discussion of the PMOD connector on the magnetometer module. PMOD has +5V on the power pin, but the I/O need to be 3.3V levels, since the I/O are not 5v-tolerant.  Dave is looking at a separate 2-pin connector to supply +5V to the magnetometer module rather than using the PMOD pin. The concern is that someone will connect up the magnetometer to a 5V-PMOD with 5V logic levels causing potential failure.  We need to agree on the configuration on both the DE and the Magnetometer before final layout.</div><div><br></div><div>-- Tom, N5EG</div><div><br></div><div><br></div></div></div>