<div dir="ltr"><div dir="ltr"><div><br>Notes from PSWS / TangerineSDR call of 12-02-2019</div><div><br></div><div>1. Receiver: 40 MHz LPF filter is preferred by the group. The loss at 6M is a little higher, but likely will need an LNA for 6M use anyway, so that may not matter. The nearby-above-61 MHz loss is better with the 40 MHz filter. Also include jumpers for power and ground bonding and for use by some future low-noise amplifier.</div><div><br></div><div>2. Dave W. recommends putting pads for a low cost I2C temperature sensor on the magnetometer module just in case the PNI-3000 has temperature sensitivity and needs compensation. Scotty recommends adding a strap to one of the temperature sensor address lines so that sensors on the local and remote ends can be separately addressable.</div><div><br></div><div>3. We currently do not have a logo for the Personal Space Weather Station. Would such be useful? Dave L., Scotty, and Nathaniel will add some material to the <a href="http://tangerinesdr.com">tangerinesdr.com</a> webpage tying the various parts of the project together.</div><div><br></div><div>-- Tom, N5EG</div><div><br></div></div></div>