<div dir="ltr"><div dir="ltr"><div><br>Notes from PSWS / TangerineSDR call of 11-25-2019</div><div><br></div><div>1. Scotty wants +3.3 volts DC power available on the filter connector.<br>Tom will wait for Scotty's additional review comments before updating the design.</div><div><br></div><div>2. Scranton Hilton hotel will be the conference hotel for HAMSCI. About one or two blocks from the conference venue. Room block has not yet<br>been reserved. There is also a Radisson across the street, which used to be the old Lackawanna Station train station. HAMSCI is March 20-21, 2020.<br>The conference will be in the Loyola Science Center. Walking map: <a href="https://goo.gl/maps/WaYhcAxq3WBHZi2MA">https://goo.gl/maps/WaYhcAxq3WBHZi2MA</a><br>Scranton Airport:  AVP</div><div><br></div><div>3. Dave's first magnetometer package raw cost estimate (low volume parts, prototype PCB quantity, etc.) is about $70 for<br>{ local + remote + magnetometer module }. Cable cost is excluded from this estimate. Hyomin mentioned there is a well-calibrated Fluxgate</div><div>magnetometer at Jenny Jump which might make a good location for comparison.</div><div><br></div><div>-- Tom, N5EG</div><div><br></div></div></div>