<div dir="ltr"><div>The Receiver requirements document has been updated to Ver 0.4 to change the attenuator</div><div>specifications to 0 - 30 dB with 10 dB steps, and other miscellaneous clean ups. The</div><div>ICD was tweaked slightly to change one connector pin signal value.</div><div><br></div><div>With this, the Receiver design package (schematic, net list, parts list, etc.) has been sent to Scotty</div><div>for the first sanity check. </div><div><br></div><div>-- Tom, N5EG</div><div><br></div><div><br></div></div>