<div dir="ltr"><div dir="ltr"><div><br>Notes from PSWS / TangerineSDR call of 09-07-2019</div><div><br></div><div>1. Tom to clarify the magnetometer document to highlight that the Ethernet extender cable carries I2C, not Ethernet, it's just<br>a standard off-the-shelf cable.</div><div><br></div><div>2. RF Modules are now 110mm x 50mm. May need to extend the board so the SMA connectors clear the next board on top.</div><div><br></div><div>3. Can we use 1.8V LVDS on the RF module pins, or must they be 2.5V? The Analog Devices part is 1.8V only.</div><div><br></div><div>4. The GPS module appears possibly tight size-wise based on the system mechanical drawings and mock-up.</div><div><br></div><div>-- Tom, N5EG</div><div><br></div></div></div>